If you are experiencing an issue with your LG Washer, you may need to clear the IE code. Clearing the IE code can help to reset the washer and restore it to its original factory settings. This guide will provide step-by-step instructions on how to clear the IE code on an LG Washer.
First, you will need to unplug the washer from the wall outlet. Once the washer is unplugged, press and hold the START/PAUSE button for 5 seconds. After 5 seconds, plug the washer back into the wall outlet. The IE code should now be cleared.
Popular: What Does CL Mean On LG Washer
If the IE code is still present after following these steps, you may need to reset the washer. To do this, press and hold the START/PAUSE button for 5 seconds. Then press and hold the TEMP and SPIN buttons at the same time for 3 seconds. The washer should now be reset and the IE
How To Clear Ie Code On Lg Washer
To clear the IE code on an LG washer, first unplug the washer from the wall outlet. Then, press and hold the START/PAUSE and the SPIN SPEED buttons simultaneously for 3 seconds. The IE code should now be cleared.
Favorite: How To Soak Clothes In LG Top Load Washing Machine
How To Clear Ie Code On Lg Washer
1. Unplug the washer from the power source.
2. Press and hold the Start/Pause and Pre Wash buttons simultaneously for 3 seconds.
3. Release the buttons and the washer should display the IE error code.
4. Press the Start/Pause button once to clear the code.
5. Plug the washer back in and turn the power back on.
6. Run a test cycle to make sure the code is cleared.
In conclusion, clearing the IE code on an LG washer is a relatively simple process. All you need to do is unplug the washer from the power source, wait for a few minutes, and then plug it back in. This should reset the washer and clear the IE code. If the code persists, you may need to check the water supply hoses, the inlet valves, and the drain hose for any blockages or clogs. If all else fails, contact an LG service technician for further assistance.