If you have a Whirlpool dehumidifier that is not working properly, it may be due to a faulty bucket switch. In this guide, we will show you how to repair the bucket switch on a Whirlpool dehumidifier. Before attempting any repairs, make sure to unplug the unit and wear protective gear such as gloves and safety glasses.
First, you will need to locate the bucket switch on the dehumidifier. This can usually be found on the back or side of the unit. Once you have located the switch, you will need to remove it from the dehumidifier. This can be done by unscrewing the screws that hold it in place.
How To Repair Bucket Switch On Whirlpool Dehumidifier
1. Unplug the dehumidifier from the wall outlet.
2. Remove the bucket from the dehumidifier.
3. Locate the bucket switch on the dehumidifier.
4. Remove the screws that hold the bucket switch in place.
5. Disconnect the wires from the bucket switch.
6. Inspect the bucket switch for any damage or corrosion.
7. If the bucket switch is damaged, replace it with a new one.
8. Reconnect the wires to the new bucket switch.
9. Secure the bucket switch in place with the screws.
10. Plug the dehumidifier back into the wall outlet.
11. Test the dehumidifier to make sure the bucket switch is working properly.
How To Repair Bucket Switch On Whirlpool Dehumidifier
In conclusion, repairing a bucket switch on a Whirlpool dehumidifier is a relatively simple process. First, you should unplug the dehumidifier and remove the bucket from the unit. Then, you should inspect the switch for any signs of damage or wear. If the switch is damaged, you should replace it with a new one. Finally, reassemble the dehumidifier and plug it back in. With a few simple steps, you can have your dehumidifier working properly again.