If you need to reset your Maytag Commercial Washer, it is a relatively simple process. This guide will walk you through the steps to reset your washer. Before you start, make sure that the washer is plugged in and that the power is on. You will also need to make sure that the washer is empty of any clothes or other items.
First, press and hold the “Power” button for two seconds. This will turn the washer off. Next, press and hold the “Start” button for three seconds. This will reset the washer and clear any errors that may have been displayed. Finally, press the “Power” button again to turn the washer back on.
Your Maytag Commercial Washer should now be reset and ready to use. If you have any further questions or need additional assistance, please contact Maytag Customer Service.
How To Reset Maytag Commercial Washer
To reset a Maytag Commercial Washer, press and hold the “Start/Pause” button for three seconds. This will reset the machine and clear any error codes.
How To Reset Maytag Commercial Washer
1. Unplug the washer from the wall outlet.
2. Remove the top panel of the washer by unscrewing the screws located on the back of the machine.
3. Locate the reset switch on the control board.
4. Push the reset switch and hold it for 5 seconds.
5. Replace the top panel and screw it back into place.
6. Plug the washer back into the wall outlet.
7. Turn the washer on and select the desired cycle.
In conclusion, resetting a Maytag Commercial Washer is a relatively simple process. First, unplug the washer from the wall outlet. Then, press and hold the Start/Pause button for 3 seconds. Finally, press the Start/Pause button again to reset the washer. Following these steps should reset the washer and allow it to be used again.