If you need to drain your Hotpoint washing machine, you can do so by following a few simple steps. First, make sure the machine is unplugged from the wall. Then, locate the drain hose on the back of the machine. It should be located near the bottom. Next, place a bucket or other container beneath the hose and use a flathead screwdriver to loosen the clamp on the hose. Once the clamp is loose, the water should begin draining into the container. When the container is full, remove it and replace it with an empty one. Continue this process until all of the water has been drained from the machine. Finally, replace the clamp and plug the machine back in.
How To Drain Hotpoint Washing Machine
Draining a Hotpoint washing machine is a simple process that requires a few basic tools. First, unplug the machine from the power source and turn off the water supply. Then, locate the drain hose and remove it from the back of the machine. Place the hose in a bucket or sink. Turn the knob on the back of the machine to the drain setting and wait for the water to drain out. When the water has finished draining, turn the knob back to the off setting and replace the drain hose. Finally, turn the water supply back on and plug the machine back in.
How To Drain Hotpoint Washing Machine
1. Unplug the washing machine from the electrical outlet.
2. Turn off the water supply valves located behind the washing machine.
3. Place a bucket or container underneath the drain hose at the back of the washing machine.
4. Disconnect the drain hose from the back of the washing machine.
5. Allow the water to drain into the bucket or container.
6. Once the water has finished draining, reconnect the drain hose to the back of the washing machine.
7. Turn on the water supply valves and plug the washing machine back into the electrical outlet.
In conclusion, draining a Hotpoint washing machine is a relatively simple process. First, you need to locate the drain hose and disconnect it from the wall. Then, place the hose in a sink or bucket to collect the water. Finally, turn the dial to the drain cycle and wait for the water to drain. Once the water has drained, turn the dial back to the off position and disconnect the hose. With these steps, you can easily drain your Hotpoint washing machine.