If your LG washer won’t stop spinning, it can be a frustrating experience. Not only can it be a nuisance, but it can also cause damage to your washer and the clothes inside. Fortunately, there are a few steps you can take to troubleshoot the issue and get your washer spinning correctly again. In this article, we’ll discuss the common causes of why your LG washer won’t stop spinning and how to fix them.
Why Lg Washer Wont Stop Spinning
LG washers are reliable and efficient machines, but sometimes they can experience problems that can cause them to not stop spinning. This can be caused by a number of issues, including a faulty lid switch, a broken belt, a worn out clutch, or a clogged drain hose. If the washer is still spinning, it is important to unplug the machine and investigate the cause of the issue. If the lid switch is faulty, it should be replaced. If the belt is broken, it should be replaced. If the clutch is worn out, it should be replaced. If the drain hose is clogged, it should be cleared. Once the issue has been identified and addressed, the washer should be able to stop spinning properly.
Why Lg Washer Wont Stop Spinning
1. Check the lid switch: Make sure the lid switch is engaged and that the washer lid is completely closed.
2. Check the timer: Make sure the timer is set correctly and that it is advancing.
3. Check the drain hose: Make sure the drain hose is not kinked or clogged.
4. Check the water level: Make sure the water level is not too high or too low.
5. Check the drive belt: Make sure the drive belt is in good condition and is properly tensioned.
6. Check the motor: Make sure the motor is working properly and that all connections are secure.
7. Check the control board: Make sure the control board is functioning properly and that all connections are secure.
In conclusion, the reason why an LG washer won’t stop spinning is likely due to a faulty lid switch, a broken drive belt, or a worn out motor. If the lid switch is faulty, it may need to be replaced. If the drive belt is broken, it will need to be replaced. And if the motor is worn out, it will need to be replaced as well. If none of these are the issue, then it may be a problem with the control board or a wiring issue. In any case, it is best to have a professional technician diagnose and repair the issue.