If your Whirlpool washing machine is not turning on, it could be due to a few different reasons. It could be a power issue, a mechanical issue, or a problem with the control board. Before attempting to diagnose the issue, it is important to make sure the machine is plugged in and the power switch is in the “on” position. If the machine is still not turning on, then it is time to troubleshoot further to determine the cause of the problem.
Why Is My Whirlpool Washing Machine Not Turning On
If your Whirlpool washing machine is not turning on, it may be due to a power issue, a faulty control board, a broken lid switch, or a faulty timer. Check the power cord and outlet to make sure they are both working correctly. If the power is good, check the control board for any signs of damage or corrosion. If the control board is fine, check the lid switch to make sure it is functioning properly. Lastly, check the timer to make sure it is working properly. If all of these components are in working order, you may need to contact a professional for further assistance.
Why Is My Whirlpool Washing Machine Not Turning On
1. Check the power cord and the wall outlet to make sure they are connected properly.
2. Check the circuit breaker to make sure it is not tripped.
3. Check the door switch to make sure it is not stuck in the closed position.
4. Check the timer knob to make sure it is in the correct position.
5. Check the control panel to make sure it is not locked.
6. Check the water supply to make sure it is connected and turned on.
7. Check the drain hose to make sure it is not clogged or kinked.
8. Check the lid switch to make sure it is not stuck in the closed position.
9. Check the wiring harness to make sure it is connected properly.
10. Check the motor to make sure it is not burned out or has a short.
After considering all the possible causes of why your Whirlpool washing machine is not turning on, it is likely that the issue is related to a faulty power cord or a blown fuse. If you have checked the power cord and fuse and they are both in working order, then it is likely that there is a more serious issue with the machine itself. It is best to contact a qualified repair technician to diagnose and repair the issue.