If your Whirlpool dehumidifier is not collecting water, it could be due to a number of reasons. It could be caused by a blocked filter, a full tank, a faulty fan, or a malfunctioning compressor. It is important to troubleshoot the problem in order to determine the cause and fix the issue. This guide will provide you with information on how to diagnose and fix the problem with your Whirlpool dehumidifier.
Why Is My Whirlpool Dehumidifier Not Collecting Water
There are several possible reasons why your Whirlpool dehumidifier is not collecting water. It could be due to a clogged air filter, a faulty fan motor, a blocked drain hose, or a malfunctioning compressor. It is best to consult the user manual for your specific model to troubleshoot the issue.
Why Is My Whirlpool Dehumidifier Not Collecting Water
1. Check the air filter to make sure it is clean and not blocked.
2. Make sure the bucket is properly installed and the float switch is not stuck.
3. Check the drain hose for any blockages or kinks.
4. Ensure the room temperature is above 65°F.
5. Check the condensate pump is working properly.
6. Make sure the drain hose is not kinked or blocked.
7. Check the fan motor for any obstructions.
8. Make sure the humidity setting is not set too low.
9. Check the evaporator coil for any ice buildup.
10. Check the compressor for any signs of damage or wear.
After troubleshooting the issue, it appears that the main cause of the dehumidifier not collecting water is due to a clogged air filter, which is preventing the air from properly circulating and allowing the dehumidifier to properly collect the moisture from the air. Cleaning or replacing the air filter should resolve the issue and allow the dehumidifier to collect water once again.