Hello! If your Maytag washer is stuck on sensing, it can be very frustrating. This is a common problem that can be caused by a few different things. The most likely culprit is a clogged filter, which can cause the washer to become unbalanced and unable to move forward in the cycle. Other possible causes include a faulty lid switch, a faulty water level switch, or a faulty motor. In this guide, we will discuss the common causes and how to fix them.
Why Is My Maytag Washer Stuck On Sensing
The most likely cause of this issue is a clogged drain hose. Check the drain hose for any clogs or blockages and clear them out. If the hose is clear, then the issue may be a faulty water level switch or pressure switch. In this case, you will need to contact a professional for repair.
Why Is My Maytag Washer Stuck On Sensing
1. Check the water supply lines to ensure they are connected and turned on.
2. Check the power cord to make sure it is securely plugged into the wall.
3. Check the water level switch to make sure it is properly connected and functioning.
4. Check the drain hose to make sure it is properly connected and not clogged.
5. Check the lid switch to make sure it is properly connected and functioning.
6. Check the timer to make sure it is properly set and functioning.
7. Check the drive motor to make sure it is functioning properly.
8. Check the control board to make sure it is functioning properly.
9. Check the water inlet valve to make sure it is functioning properly.
10. Check the pressure switch to make sure it is functioning properly.
The most likely reason why your Maytag washer is stuck on sensing is because the water level is not being detected. This could be due to a clogged water inlet valve, a faulty water level switch, or a faulty water pressure switch. If the problem persists, it would be best to contact a qualified technician to diagnose and repair the issue.