If your LG refrigerator freezer is not freezing, it could be due to a number of different issues. It could be a problem with the thermostat, a blocked air vent, or a faulty compressor. It could also be a problem with the evaporator fan or the defrost system. In order to determine the exact cause of the issue, it is important to troubleshoot the refrigerator and freezer. This guide will provide you with some tips on how to diagnose and fix the problem.
Why Is My Lg Refrigerator Freezer Not Freezing
There are several possible causes for a refrigerator not freezing. The most common causes are a faulty compressor, a faulty thermostat, a clogged condenser coil, or a low level of refrigerant. To determine the exact cause, it is best to contact a qualified service technician.
Why Is My Lg Refrigerator Freezer Not Freezing
1. Check the temperature setting on the refrigerator/freezer. Make sure it is set to the correct temperature.
2. Check the condenser coils on the back of the refrigerator/freezer. Make sure they are clean and free of dust and debris.
3. Check the evaporator fan in the freezer. Make sure it is working properly.
4. Check the door seals to make sure they are tight and not allowing cold air to escape.
5. Check the defrost timer and make sure it is working properly.
6. Check the evaporator coils for frost buildup. If there is frost buildup, it could be blocking air flow and preventing the freezer from cooling.
7. Check the compressor for any signs of wear or damage. If the compressor is not working properly, it could be preventing the freezer from cooling.
8. If all of the above steps have been completed and the freezer is still not cooling,
After examining the possible causes of why your LG refrigerator freezer is not freezing, it is likely that the issue is related to a faulty thermostat, a malfunctioning evaporator fan motor, or a clogged defrost drain. If you have checked the temperature setting and ensured that the appliance is plugged in, then it is best to call a qualified technician to diagnose and repair the issue.