Electrolux washers are known for their reliability and durability, but sometimes they can have issues with the spin cycle. If your Electrolux washer won’t stop spinning, it could be due to a number of different issues. Common causes of an Electrolux washer not stopping include a faulty lid switch, a worn belt, or a faulty timer. In this article, we will discuss the various causes of an Electrolux washer not stopping and how to troubleshoot them.
Why Electrolux Washer Wont Stop Spinning
Electrolux washer won’t stop spinning is a common issue that can be caused by a few different factors. The most common cause is a faulty lid switch. This switch is responsible for sensing when the lid is closed and allowing the washer to spin. If the switch is faulty, the washer will not be able to sense when the lid is closed and will continue to spin. Other possible causes include a faulty timer, a broken belt, or a faulty motor. To diagnose the issue, a technician will need to inspect the washer to determine the cause. Once the cause is determined, the technician can then replace the faulty part and get the washer spinning properly again.
Why Electrolux Washer Wont Stop Spinning
1. Check the lid switch: Make sure the lid switch is working properly. If it is not, replace it.
2. Check the timer: Make sure the timer is set properly. If it is not, adjust it accordingly.
3. Check the belt: Make sure the belt is not worn or stretched. If it is, replace it.
4. Check the motor: Make sure the motor is working properly. If it is not, replace it.
5. Check the drain hose: Make sure the drain hose is not clogged or blocked. If it is, clear it.
6. Check the water level switch: Make sure the water level switch is working properly. If it is not, replace it.
7. Check the agitator: Make sure the agitator is not damaged or worn. If it is, replace it.
After troubleshooting the issue, it appears that the most likely cause of the Electrolux washer not stopping spinning is due to a faulty lid switch. This switch is located on the top of the washer and is responsible for sensing when the lid is opened or closed. If this switch is not functioning properly, the washer will continue to spin even when the lid is open. Replacing the lid switch should resolve the issue and allow the washer to stop spinning when the lid is opened.