Why Electrolux Washer Shaking Violently

Electrolux washers are known for their reliability and durability, but sometimes they can start shaking violently during the spin cycle. This can be a sign of a serious problem, and it is important to address the issue as soon as possible. In some cases, the shaking can be caused by a worn-out or damaged part, while in others it could be due to an issue with the washer’s balance or calibration. In any case, it is important to investigate the cause of the shaking and take the necessary steps to resolve it.

Why Electrolux Washer Shaking Violently

Electrolux washers may shake violently due to an unbalanced load, a worn suspension system, or an off-balance washer drum. An unbalanced load can be caused by an uneven distribution of items in the washer, such as too many items on one side of the drum. The suspension system may be worn if the washer has been in use for a long time, and the drum may be off-balance if the washer has not been leveled correctly. To fix the issue, the load should be redistributed, the suspension system should be checked and replaced if necessary, and the washer should be leveled.

Why Electrolux Washer Shaking Violently

1. Check the washer’s installation: Make sure the washer is level and that the feet are adjusted correctly.

2. Check the load size: Too much or too little laundry can cause the washer to shake.

3. Check the spin cycle: Make sure the spin cycle is not too fast.

4. Check the hoses: Make sure the water supply hoses are not kinked or clogged.

5. Check the shock absorbers: Make sure the shock absorbers are in good condition and not worn out.

6. Check the motor: Make sure the motor is not malfunctioning or damaged.

7. Check the belt: Make sure the belt is in good condition and not worn out.

8. Check the suspension system: Make sure the suspension system is in good condition and not worn out.

The cause of an Electrolux washer shaking violently could be due to a number of different factors. It could be due to unbalanced loads, worn suspension components, or a faulty motor. It is important to inspect the washer and determine the exact cause of the shaking before attempting any repair. In some cases, a simple adjustment or repair can solve the problem. If the shaking persists, it is best to contact a qualified technician for further assistance.