Hello! If your Samsung washer is displaying the error code ‘SUD’, it means that the washer has detected a high level of suds in the water. This can be caused by using too much detergent, or using the wrong type of detergent. To resolve this issue, you will need to run an extra rinse cycle to remove the suds. Additionally, you should reduce the amount of detergent used in future washes, or switch to a low-sudsing detergent. Thank you for using Samsung products!
Why Does My Samsung Washer Say Sud
This means that there is too much detergent or fabric softener in the washer. You will need to run a cycle with no detergent or fabric softener to clear the suds.
Why Does My Samsung Washer Say Sud
1. Check the drain hose for any clogs or blockages.
2. Check the water supply valves to make sure they are open and the water supply is turned on.
3. Check the inlet hose filter for any blockages.
4. Check the detergent drawer for any residue or clogs.
5. Check the water level switch for any problems.
6. Check the pressure switch for any problems.
7. Clean the drain pump filter.
8. Reset the washing machine by unplugging it from the power source and plugging it back in.
9. Run a cycle with no detergent to make sure the washer is draining properly.
10. If the issue persists, contact a qualified technician to inspect the washer.
The Samsung washer’s “SUD” error code indicates that the washer has detected too much suds in the wash cycle. This could be caused by using too much detergent, using the wrong type of detergent, or not using enough water to rinse away the detergent. To fix this problem, reduce the amount of detergent used, use the correct type of detergent, and make sure to use enough water to rinse away the detergent. If the problem persists, contact a Samsung service center for further assistance.