Title: Whirlpool Washer WFW72HEDW0 Fills Slowly or Will Not Fill at All
Hey there! Are you facing issues with your Whirlpool washer model WFW72HEDW0? Is it taking forever to fill or not filling at all? Don’t worry, we’ve got your back! In this blog post, we’ll explore the possible causes behind this problem and provide you with some simple troubleshooting steps to get your washer up and running smoothly again. So, let’s dive in!
1. Check the Water Supply:
Is the Water Supply Adequate?
The first thing you should do is ensure that the water supply to your washer is sufficient. Sometimes, low water pressure or a clogged water inlet valve can cause slow or no filling.
2. Inspect the Water Inlet Valve:
Is the Water Inlet Valve Working Properly?
The water inlet valve is responsible for allowing water into the washer. If it’s faulty, your washer may fill slowly or not at all. Check for any signs of damage or debris clogging the valve. If necessary, clean or replace it.
3. Examine the Water Inlet Hoses:
Are the Water Inlet Hoses in Good Condition?
Inspect the water inlet hoses for any kinks, leaks, or blockages. Damaged hoses can restrict water flow and lead to slow or no filling. Replace any faulty hoses to ensure proper water supply.
4. Verify the Water Pressure:
Is the Water Pressure Adequate?
Inadequate water pressure can cause your washer to fill slowly. Check the water pressure from your home’s water supply and ensure it meets the recommended level for your washer. If the pressure is low, consider contacting a plumber to address the issue.
5. Clean the Water Inlet Screens:
Are the Water Inlet Screens Clogged?
The water inlet screens, located at the back of the washer, can accumulate debris over time, leading to slow or no filling. Gently remove these screens and clean them thoroughly. Reinstall them once they are free from any blockages.
6. Inspect the Water Level Pressure Switch:
Is the Water Level Pressure Switch Functioning Correctly?
The water level pressure switch detects the water level in the washer and controls the filling process. If it’s malfunctioning, your washer may not fill properly. Test the switch using a multimeter or consult a professional to determine if it needs to be replaced.
7. Check the Control Board:
Is the Control Board Working?
A faulty control board can disrupt the filling process of your washer. Inspect the control board for any visible signs of damage or loose connections. If necessary, replace the control board to restore proper functionality.
8. Inspect the Water Level Sensor:
Is the Water Level Sensor Faulty?
The water level sensor monitors the water level inside the washer. If it’s defective, it can cause issues with filling. Test the sensor using a multimeter or seek assistance from a professional to determine if it needs to be replaced.
9. Verify the Pressure Switch Hose:
Is the Pressure Switch Hose Clogged or Damaged?
The pressure switch hose connects the pressure switch to the tub. If it’s clogged or damaged, it can disrupt the filling process. Check the hose for any blockages or leaks. If necessary, clean or replace it to ensure proper water flow.
10. Examine the Drain Hose:
Is the Drain Hose Positioned Correctly?
Sometimes, a poorly positioned drain hose can create a siphoning effect, causing the washer to fill slowly or not at all. Ensure that the drain hose is positioned correctly, with the end elevated above the water level. This will prevent water from draining out prematurely.
11. Run a Diagnostic Test:
Have You Tried Running a Diagnostic Test?
Most Whirlpool washers have a built-in diagnostic mode that can help identify any underlying issues. Consult your washer’s manual to learn how to activate the diagnostic mode and follow the instructions provided.
Conclusion:
By following these troubleshooting steps, you should be able to address the slow or no filling issue with your Whirlpool washer model WFW72HEDW0. Remember, if you’re unsure or uncomfortable performing any of the steps, it’s always best to seek assistance from a professional technician. We hope this guide has been helpful, and soon enough, you’ll have your washer back to its efficient self, ready to tackle those laundry loads with ease!