Title: Whirlpool Washer WFW70HEBW2 Won’t Agitate
Have you ever experienced the frustration of a washing machine that won’t agitate? It can be a real headache, especially when you have a pile of dirty laundry waiting to be cleaned. One common culprit for this issue is the Whirlpool Washer WFW70HEBW2. In this blog post, we will explore the possible causes of why your Whirlpool washer won’t agitate and provide some troubleshooting tips to help you get your laundry routine back on track. So, let’s dive in and unravel this mystery!
Understanding the Agitation Process
Before we delve into the potential reasons for your Whirlpool washer’s agitation problem, let’s take a moment to understand what agitation actually means. In the context of a washing machine, agitation refers to the back-and-forth motion of the agitator, which helps to move the clothes around and loosen dirt and stains during the wash cycle. Without proper agitation, your clothes may not get thoroughly cleaned, leaving you with less than satisfactory results.
Checking for Power Issues
The first step in troubleshooting your Whirlpool washer’s agitation problem is to ensure that it has a steady power supply. Sometimes, a loose or disconnected power cord can prevent the washer from functioning correctly. Check if the power cord is securely plugged into the outlet and make sure there are no visible damages. Additionally, verify that the circuit breaker or fuse connected to the washer is not tripped or blown.
Examining the Drive Belt
The drive belt plays a crucial role in the agitating process of your Whirlpool washer. Over time, the belt can wear out or become loose, resulting in a lack of agitation. To inspect the drive belt, you’ll need to access the washer’s back panel. Carefully remove the panel and check if the belt is intact, properly aligned, and tensioned. If you notice any signs of damage or excessive slack, it’s time to replace the drive belt.
Inspecting the Agitator Dogs
The agitator dogs are small plastic parts located inside the agitator that engage with the agitator’s teeth to create the back-and-forth motion. If these dogs become worn out or broken, your Whirlpool washer may not agitate properly. To examine the agitator dogs, remove the fabric softener dispenser or cap from the top of the agitator and unscrew the agitator bolt. Lift the agitator out and inspect the dogs for any signs of damage. If necessary, replace the agitator dogs to restore proper agitation.
Checking the Motor Coupling
The motor coupling connects the motor to the transmission in your Whirlpool washer, allowing it to drive the agitator’s movement. If the motor coupling is broken or worn out, it can prevent the agitator from functioning correctly. To inspect the motor coupling, you’ll need to remove the washer’s cabinet. This process may vary depending on your model, so refer to the user manual or online resources for specific instructions. If you find that the motor coupling is damaged, replace it to resolve the agitation issue.
Verifying the Transmission Assembly
The transmission assembly is another crucial component responsible for the proper functioning of the agitator. If the transmission is faulty or damaged, it can result in a lack of agitation. To check the transmission assembly, you’ll need to remove the washer’s cabinet and locate the transmission. Inspect it for any visible signs of damage or leaks. If you notice any issues, such as broken gears or oil leaks, it’s recommended to replace the transmission assembly.
Examining the Lid Switch
The lid switch is a safety feature that prevents the washer from agitating when the lid is open. If the lid switch is faulty or not engaging properly, it can cause your Whirlpool washer to not agitate. To inspect the lid switch, open the washer’s lid and locate the switch, usually located near the lid hinge. Check if the switch is intact and functioning correctly. If you suspect a problem with the lid switch, it may need to be replaced to restore agitation.
Troubleshooting Control Board Issues
In some cases, an issue with the control board can lead to a lack of agitation in your Whirlpool washer. The control board is responsible for controlling various functions of the washer, including the agitation cycle. If the control board is malfunctioning or has a faulty component, it can disrupt the agitating process. While troubleshooting control board issues can be complex, you can try resetting the control board by unplugging the washer for a few minutes and then plugging it back in. If the problem persists, it’s best to consult a professional technician for further assistance.
Seeking Professional Help
If you have exhausted all the troubleshooting steps mentioned above and your Whirlpool washer still won’t agitate, it may be time to seek professional help. A certified technician will have the expertise and specialized tools to diagnose and fix the underlying problem accurately. They can also provide you with the necessary replacement parts if required.
Conclusion:
Dealing with a Whirlpool washer that won’t agitate can be frustrating, but with the right troubleshooting steps, you can identify and resolve the issue. From checking power issues to inspecting components like the drive belt, agitator dogs, motor coupling, transmission assembly, lid switch, and control board, there are several potential causes to consider. By following the steps outlined in this blog post, you’ll be well on your way to getting your Whirlpool washer, model WFW70HEBW2, back to agitating your laundry effectively. Remember, if all else fails, don’t hesitate to seek professional assistance. Happy washing!