The fuse on a Keystone window air conditioner is located behind the control panel. To access the fuse, first remove the control panel cover. There should be a small fuse box located behind the control panel.
Where Is Fuse On Keystone Window Air Conditioner
The Keystone Window Air Conditioner has a fuse located on the back of the unit. The fuse is used to protect the electrical components of the air conditioner from damage due to power surges. It is important to check the fuse periodically to ensure that it is in good working condition. If the fuse is blown, it can be replaced with a new one. It is important to use the proper size and type of fuse to ensure the safety of the unit.
Where Is Fuse On Keystone Window Air Conditioner
1. Locate the main power switch on the window air conditioner. This is usually located on the side of the unit.
2. Turn off the main power switch and unplug the window air conditioner from the wall outlet.
3. Remove the screws from the back of the unit and carefully remove the cover.
4. Locate the fuse on the circuit board. It will be a small, cylindrical component with two metal prongs.
5. Carefully remove the fuse and inspect it for any signs of damage. If the fuse is damaged, replace it with a new fuse of the same size and rating.
6. Reinstall the fuse and reassemble the window air conditioner.
7. Plug the window air conditioner back into the wall outlet and turn on the main power switch.
In conclusion, the fuse on a Keystone window air conditioner is located on the control board. It is usually located behind the front panel of the air conditioner and can be accessed by removing the screws that hold the panel in place. The fuse should be checked regularly to ensure that it is not blown and that the air conditioner is operating properly.