The defrost timer on an Electrolux refrigerator is typically located at the back of the refrigerator, near the top. It is usually a round, black knob that is connected to a small circuit board. The timer is responsible for controlling the refrigerator’s defrost cycle and ensuring that the refrigerator does not freeze up. To access the defrost timer, you will need to remove the back panel of the refrigerator. Once the panel is removed, you should be able to easily locate the timer.
Where Is Defrost Timer On Electrolux Refrigerator
The defrost timer on an Electrolux refrigerator is located behind the control panel in the refrigerator’s interior. It is a small, cylindrical device that is responsible for controlling the defrost cycle of the refrigerator. The timer consists of two wires, a start and a finish wire, and a knob that can be turned to manually initiate the defrost cycle. The timer is usually located near the top of the refrigerator, and may be hidden behind a plastic cover. It is important to note that the timer must be set correctly in order for the refrigerator to work properly.
Where Is Defrost Timer On Electrolux Refrigerator
1. Unplug the refrigerator from the wall outlet.
2. Remove the lower kick plate from the front of the refrigerator.
3. Locate the defrost timer, which is typically located on the lower back wall of the refrigerator.
4. Remove the screws that secure the timer to the wall.
5. Pull the timer out and disconnect the wires.
6. Inspect the timer for any signs of damage or wear.
7. Replace the timer with a new one if necessary.
8. Reconnect the wires and secure the timer with the screws.
9. Replace the kick plate and plug the refrigerator back in.
In conclusion, the defrost timer on an Electrolux refrigerator is located behind the control panel on the back wall of the refrigerator. It is a small, cylindrical device with two wires attached to it. It is important to know where the defrost timer is located in case it needs to be replaced or adjusted.