Title: Kenmore Washer 110.5072011 Won’t Drain
Hey there! Are you facing the frustrating issue of your Kenmore washer 110.5072011 refusing to drain? Don’t worry, you’re not alone. Many people have encountered this problem, and I’m here to help you troubleshoot and fix it. In this article, we’ll dive into the possible causes of this issue and provide you with some practical solutions. So, let’s roll up our sleeves and get your washer back to its draining glory!
1. Understanding the importance of a draining washer
Before we jump into the troubleshooting process, let’s take a moment to understand why a properly draining washer is essential. When your washer fails to drain, it can lead to a host of problems, such as foul odors, mold growth, and even damage to the machine itself. So, it’s crucial to address this issue promptly to avoid any further complications.
2. Check for clogged drain hose
One of the most common culprits behind a non-draining washer is a clogged drain hose. To check if this is the problem, you’ll need to locate the drain hose at the back of your machine. Disconnect it and inspect for any blockages. A simple way to do this is by blowing air through the hose or using a long, flexible brush to remove any debris.
3. Inspect the drain pump
If the drain hose seems clear, the next step is to examine the drain pump. The drain pump is responsible for removing water from the washer during the drainage cycle. Over time, it can get clogged with lint, small objects, or even coins. To access the drain pump, consult your washer’s manual for specific instructions. Once you’ve located it, check for any obstructions and remove them carefully.
4. Test the lid switch
Believe it or not, a faulty lid switch can also prevent your Kenmore washer from draining. The lid switch is a safety mechanism that ensures the washer stops spinning when the lid is open. If the switch is malfunctioning, it may think that the lid is still open, causing the washer to refuse drainage. To test the lid switch, open and close the lid a few times while listening for a clicking sound. If you don’t hear the click, it’s likely that the switch needs to be replaced.
5. Examine the pump belt
In some cases, a worn-out or broken pump belt can be the reason behind your washer’s drainage woes. To inspect the pump belt, you’ll need to access the back of the washer. Look for any signs of damage, such as cracks, fraying, or complete detachment. If you notice any issues, replace the belt with a new one to restore proper drainage.
6. Clear the drain filter
Another potential culprit for a non-draining washer is a clogged drain filter. The drain filter is responsible for catching lint, hair, and other debris that may have made their way into the washer. Over time, this filter can become clogged, hindering proper drainage. To clean the drain filter, consult your washer’s manual for its location and removal instructions. Once removed, rinse it under running water to remove any trapped debris.
7. Check the drain pump impeller
The drain pump impeller is a small, fan-like component that helps propel water out of the washer during the drainage cycle. If the impeller is damaged or blocked by debris, it can impede proper drainage. To inspect the impeller, you’ll need to remove the drain pump cover. Once exposed, check for any obstructions and clean them out carefully. If the impeller is damaged, it may need to be replaced.
8. Verify the drain hose height
Did you know that the height of your drain hose can affect your washer’s ability to drain properly? If the drain hose is too low or too high, it can cause water to back up or drain too slowly. Ensure that the drain hose is positioned correctly, following the manufacturer’s guidelines. Additionally, make sure there are no kinks or bends in the hose that could obstruct water flow.
Conclusion:
Congratulations! You’ve made it through the troubleshooting process for your Kenmore washer 110.5072011 that won’t drain. By following the steps outlined in this article, you should be well on your way to resolving the issue and getting your washer back in working order. Remember to always prioritize safety when working with electrical appliances and consult a professional if you’re unsure about any step. Happy washing!