Kenmore Washer 110.5072011 Door Or Lid Won’T Lock

Title: Kenmore Washer 110.5072011 Door or Lid Won’t Lock

Have you ever faced a situation where your Kenmore Washer 110.5072011 door or lid refuses to lock? It can be frustrating, especially when you’re in a rush to get your laundry done. But fear not! In this article, we’ll delve into the possible reasons behind this issue and explore some troubleshooting tips to help you resolve it. So, let’s roll up our sleeves and get to the bottom of this problem!

Understanding the Importance of a Locked Door or Lid

Before we jump into the troubleshooting, let’s take a moment to understand why a locked door or lid is crucial for your Kenmore Washer 110.5072011. The lock mechanism ensures that the washer remains closed during the entire wash cycle, preventing any water leakage or potential accidents. It also guarantees that the washer will not start unless the door or lid is securely locked, ensuring your safety. So, when the door or lid won’t lock, it’s essential to address the issue promptly.

Possible Causes for a Door or Lid That Won’t Lock

1. Misaligned Door or Lid

One common reason for a door or lid that won’t lock is misalignment. Over time, the door or lid may shift slightly, making it difficult for the lock to engage properly. This misalignment can be caused by regular wear and tear or even accidental bumps.

2. Faulty Door or Lid Lock Mechanism

Another possible cause could be a malfunctioning lock mechanism. Just like any other mechanical component, the lock mechanism can wear out over time. If the internal parts of the lock are damaged or worn, it won’t be able to secure the door or lid effectively.

3. Sensor Issues

Sometimes, the problem may lie with the sensor that detects whether the door or lid is closed. If the sensor is faulty or dirty, it may not send the proper signal to the lock mechanism, resulting in a failure to lock.

4. Power Supply Problems

Believe it or not, power supply issues can also affect the locking mechanism. If your washer is not receiving sufficient power, it may not be able to engage the lock properly. This can happen due to a faulty outlet or a tripped circuit breaker.

Troubleshooting Tips to Resolve the Issue

Now that we have a better understanding of the potential causes, let’s explore some troubleshooting tips to help you resolve the problem:

1. Check for Misalignment

Start by examining the door or lid to see if it’s properly aligned. Gently push or pull it to ensure it’s in the correct position. If you notice any misalignment, try adjusting it back into place. Be careful not to force it, as it may cause further damage.

2. Clean the Lock Mechanism

If the door or lid appears to be aligned correctly, the next step is to clean the lock mechanism. Over time, dust, lint, or other debris can accumulate and hinder the proper functioning of the lock. Use a soft cloth and some mild detergent to clean the lock area thoroughly. Ensure that you remove any dirt or grime that may be obstructing the mechanism.

3. Inspect the Sensor

Take a close look at the sensor that detects whether the door or lid is closed. Check for any visible signs of damage or dirt accumulation. If you notice any issues, gently clean the sensor using a soft cloth. Avoid using harsh chemicals that could potentially damage the sensor.

4. Verify the Power Supply

Double-check the power supply to your washer. Ensure that the outlet is functioning correctly and providing sufficient power. If you suspect a power supply issue, try plugging the washer into a different outlet or resetting the circuit breaker.

5. Consult the User Manual

If the above troubleshooting tips don’t resolve the issue, it’s time to refer to the user manual provided with your Kenmore Washer 110.5072011. The manual may contain specific instructions or additional troubleshooting steps for this particular model. It’s always a good idea to consult the manufacturer’s guidelines for further assistance.


Dealing with a Kenmore Washer 110.5072011 door or lid that won’t lock can be frustrating, but with the right troubleshooting steps, you can resolve the issue and get back to your laundry routine. Remember to check for misalignment, clean the lock mechanism, inspect the sensor, and verify the power supply. If all else fails, consult the user manual or reach out to the manufacturer for further assistance. With a little patience and persistence, you’ll have your washer back in working order in no time. Happy washing!