Title: Kenmore Washer 110.3163361 Won’t Drain
Hey there! Are you experiencing the frustrating issue of your Kenmore Washer 110.3163361 refusing to drain? Don’t worry, you’re not alone. We understand how important it is to have a fully functioning washer, so in this blog post, we’ll dive into the possible causes of this problem and provide you with some practical solutions. Let’s get started!
1. Understanding the Importance of Proper Drainage
Picture this: you load your washer with dirty laundry, add detergent, and eagerly press the start button. But to your dismay, the water refuses to drain, leaving your clothes soaking wet. Proper drainage is crucial for a washer to work effectively, as it ensures the removal of dirty water and prepares your clothes for the next step in the laundry process.
2. Check for Blockages
The first step in troubleshooting a non-draining Kenmore Washer is to check for any blockages. Start by unplugging the washer and locating the drain hose. Carefully inspect the hose for any kinks, twists, or clogs. If you find any, gently straighten the hose or remove the blockage using a plumber’s snake or a wire hanger.
3. Clear the Pump Filter
Another common culprit behind a non-draining washer is a clogged pump filter. To access the pump filter, consult your washer’s manual to locate its specific position. Once found, place a towel or a shallow container beneath it to catch any water that may spill out. Unscrew the filter cap and remove any debris or lint that may have accumulated. Give it a good clean, screw it back on, and give your washer another try.
4. Check the Drain Pump
If the blockages and pump filter are not the issue, it’s time to inspect the drain pump itself. Start by locating the pump, which is usually found at the bottom of the washer. Check for any signs of damage or debris that may be obstructing its functionality. If you notice any foreign objects, carefully remove them. However, if the pump appears to be damaged, it may need to be replaced.
5. Inspect the Lid Switch
Believe it or not, a faulty lid switch can also prevent your Kenmore Washer from draining. The lid switch is responsible for detecting whether the lid is closed, allowing the washer to proceed with the draining process. If the switch is malfunctioning, it may falsely indicate that the lid is open, resulting in a non-draining washer. Test the switch by manually pressing it down or using a multimeter to check for continuity. If it’s faulty, consider replacing it.
6. Examine the Drain Hose
Sometimes, the issue lies with the drain hose itself. Ensure that the hose is not kinked, twisted, or damaged in any way. Additionally, check if the hose is inserted too far into the drain pipe, causing a siphoning effect that prevents proper drainage. Adjust the hose if necessary and make sure it’s securely connected.
7. Assess the Water Pump Belt
In older Kenmore Washer models, a broken or loose water pump belt can cause drainage problems. Locate the belt and check for any signs of wear and tear or looseness. If the belt appears damaged or loose, replace it with a new one to restore proper functionality.
8. Consider the Drain Pump Impeller
The drain pump impeller is responsible for moving water through the pump and out of the washer. Over time, the impeller can become clogged or damaged, hindering its ability to drain water effectively. Inspect the impeller for any obstructions or signs of wear. If necessary, clean or replace the impeller to resolve the draining issue.
9. Evaluate the Control Board
In some cases, a malfunctioning control board can be the root cause of your Kenmore Washer’s drainage problem. If you’ve exhausted all other possibilities, it might be worth checking the control board for any visible signs of damage or loose connections. If you suspect the control board is faulty, consider seeking professional assistance to diagnose and repair the issue.
There you have it! We’ve explored several potential causes and solutions for your Kenmore Washer 110.3163361’s drainage problem. Remember to always prioritize safety by unplugging the washer before attempting any repairs or inspections. If you’re unsure or uncomfortable with any step, it’s best to consult a professional technician. By following these troubleshooting tips, you’ll hopefully be able to get your washer back up and running smoothly in no time. Happy washing!