Title: Kenmore Washer 110.295228 Won’t Drain
Have you ever been in a situation where your Kenmore Washer 110.295228 refuses to drain? It can be frustrating, especially when you have a pile of laundry waiting to be washed. But fear not! In this article, we will explore the possible reasons behind this issue and provide you with some easy troubleshooting steps to get your washer up and running again. So, let’s dive in and solve the mystery of why your Kenmore Washer won’t drain!
Understanding the Drainage System
Before we jump into the troubleshooting steps, let’s take a moment to understand the drainage system of your Kenmore Washer 110.295228. The drainage system is responsible for removing the dirty water from the washer after each cycle. It consists of a drain pump, hoses, and filters that work together to ensure proper water flow. If any component of this system malfunctions, it can lead to a clogged or non-draining washer.
Possible Causes of a Non-Draining Kenmore Washer
1. Clogged Drain Hose: One of the most common reasons for a non-draining washer is a clogged drain hose. Over time, lint, debris, and even small objects like coins or hairpins can accumulate in the hose, obstructing the water flow. Check the drain hose for any blockages and remove them if necessary.
2. Faulty Drain Pump: The drain pump is responsible for pumping out the water from the washer. If the pump is faulty or damaged, it won’t be able to perform its job effectively, resulting in a non-draining washer. Inspect the pump for any signs of damage, such as excessive noise or leaks. If you suspect a faulty pump, it may need to be replaced.
3. Blocked Drain Filter: Your Kenmore Washer 110.295228 is equipped with a drain filter that prevents large objects from entering the drain pump. However, over time, the filter can become clogged with lint and debris, obstructing the water flow. Locate the drain filter (usually located at the front or bottom of the washer) and clean it thoroughly to ensure proper drainage.
4. Pump Impeller Blockage: The pump impeller is a small, fan-like component inside the drain pump that helps to propel the water out of the washer. If the impeller becomes clogged with debris, it can hinder the water flow, causing the washer to not drain. You can try manually rotating the impeller to dislodge any obstructions, but if it’s severely blocked, the pump may need to be replaced.
Troubleshooting Steps to Fix a Non-Draining Kenmore Washer
Now that we have identified the possible causes, let’s move on to the troubleshooting steps to fix a non-draining Kenmore Washer 110.295228.
Step 1: Check the Drain Hose
– Turn off the washer and unplug it from the power source.
– Locate the drain hose at the back of the washer and inspect it for any blockages.
– If you find any debris, gently remove it using a long brush or by running water through the hose.
– Reconnect the hose securely and ensure it is not kinked or bent.
Step 2: Clean the Drain Filter
– Open the door or access panel to locate the drain filter.
– Place a towel or bucket underneath to catch any water that may spill out.
– Unscrew the filter cap and carefully remove the filter.
– Rinse the filter under running water to remove any debris.
– Once clean, reinstall the filter and secure the cap tightly.
Step 3: Check the Drain Pump
– Refer to the user manual or online resources to locate the drain pump in your specific model.
– Inspect the pump for any signs of damage, such as leaks or excessive noise.
– If you suspect a faulty pump, it may need to be replaced. Consult a professional if necessary.
Step 4: Clear the Pump Impeller
– If you suspect a blockage in the pump impeller, access the pump and locate the impeller.
– Gently rotate the impeller to dislodge any debris.
– If the blockage persists, consider replacing the pump or seeking professional assistance.
Step 5: Test the Washer
– Once you have completed the troubleshooting steps, plug the washer back in and run a test cycle.
– Observe if the washer drains properly after the cycle completes.
– If the issue persists, it is recommended to contact a qualified technician for further diagnosis and repair.
Conclusion
Dealing with a non-draining Kenmore Washer 110.295228 can be frustrating, but with the right troubleshooting steps, you can resolve the issue and get your washer back to working order. Remember to check the drain hose, clean the drain filter, inspect the drain pump, and clear any blockages in the pump impeller. If the problem persists, it’s best to seek professional assistance to avoid further damage. So, roll up your sleeves, follow the steps, and bid farewell to the non-draining blues!