Title: Kenmore Washer 110.2810231 Won’t Drain
Hey there! If you’re reading this article, chances are you’re facing a frustrating issue with your Kenmore Washer 110.2810231. Don’t worry, we’ve got your back! In this guide, we’ll walk you through the steps to troubleshoot and fix the problem when your washer refuses to drain. So, grab a cup of coffee, sit back, and let’s dive right in!
Understanding the Problem:
Picture this: you’ve just finished a load of laundry, and you’re ready to move on with your day. But, wait! The water in your Kenmore Washer 110.2810231 is stubbornly refusing to drain. It’s a common issue that can arise due to various reasons. It could be a clogged drain hose, a faulty pump, or even a malfunctioning lid switch. But fear not, we’ll help you identify the culprit and get your washer back up and running in no time.
Troubleshooting Steps:
Step 1: Check the Drain Hose
The first thing you’ll want to do is inspect the drain hose. Make sure it’s not kinked or clogged with lint or debris. Detach the hose from both the washer and the drain pipe, and give it a thorough inspection. If you find any blockages, remove them carefully using a long brush or a pipe cleaner.
Step 2: Examine the Pump
Now, it’s time to take a closer look at the pump. Locate the pump underneath your washer. It’s usually at the front or back, depending on the model. Check for any obstructions, such as small objects or lint, that might be preventing it from functioning properly. Use a flashlight to get a clear view and remove any debris you find.
Step 3: Test the Lid Switch
Sometimes, a malfunctioning lid switch can cause your washer to not drain. To check if this is the case, open and close the lid of your washer. You should hear a clicking sound when the lid is fully closed. If you don’t hear the click, the lid switch might need to be replaced. Consult your user manual or contact a professional for further assistance.
Step 4: Inspect the Drain Pump Belt
In some cases, a worn-out or broken drain pump belt can be the culprit behind the drainage issue. To inspect the belt, you’ll need to access the back of your washer. Remove the back panel and locate the belt. If you notice any signs of damage, such as fraying or stretching, it’s time to replace the belt.
Step 5: Clean the Drain Pump Filter
A clogged drain pump filter can also prevent your washer from draining properly. Locate the filter, usually at the front or bottom of your washer. Unscrew it gently and remove any debris or lint that has accumulated. Give it a good rinse and screw it back in tightly.
Step 6: Check the Drain Pump Motor
If none of the previous steps have resolved the issue, it’s time to inspect the drain pump motor. Disconnect the washer from the power source and access the motor. Look for any signs of damage, such as burnt wires or a burnt smell. If you notice any abnormalities, it’s best to call a professional technician to replace the motor.
Conclusion:
Congratulations! You’ve made it through the troubleshooting steps for your Kenmore Washer 110.2810231 that won’t drain. By following these steps, you should be able to identify and fix the problem, getting your washer back to its efficient self. Remember, if you’re unsure or uncomfortable performing any of these steps, it’s always best to seek professional help. Happy laundry days ahead!