Kenmore Washer 110.277216 Won’T Spin

Title: Kenmore Washer 110.277216 Won’t Spin

Have you ever faced the frustrating situation where your Kenmore Washer 110.277216 refuses to spin? It can be a real headache, especially when you’re in a rush to get your laundry done. But fear not! In this blog post, we’ll dive into the various reasons why your Kenmore Washer 110.277216 might be refusing to spin and provide you with some handy troubleshooting tips to get it back in working order. So, let’s roll up our sleeves and get to the bottom of this spinning mystery!

Understanding the Basics

Before we jump into troubleshooting, it’s essential to have a basic understanding of how a washer’s spin cycle works. When you start the spin cycle, the washer’s motor engages, causing the drum to rotate at high speeds. This spinning action helps to remove excess water from your clothes, leaving them ready for drying. If your Kenmore Washer 110.277216 won’t spin, it means there’s an issue preventing the drum from rotating as it should.

Troubleshooting Tips

1. Check the Lid Switch

One of the most common reasons for a washer not spinning is a faulty lid switch. The lid switch is a safety feature that prevents the washer from spinning when the lid is open. If the switch is defective or not making proper contact, it can interrupt the spin cycle. To check the lid switch, open and close the lid firmly. If you don’t hear a clicking sound, the switch may need to be replaced.

2. Inspect the Drive Belt

Another culprit behind a non-spinning washer could be a worn or broken drive belt. The drive belt connects the motor to the drum, enabling it to spin. Over time, the belt can become loose or damaged, preventing proper rotation. To inspect the drive belt, unplug the washer and remove the back panel. Look for any signs of wear, such as fraying or cracks. If you spot any issues, it’s time to replace the belt.

3. Check the Motor Coupler

The motor coupler is a small part that connects the motor to the transmission. If the coupler is broken or worn out, the drum won’t spin. To check the motor coupler, you’ll need to access the washer’s motor. Unplug the washer, remove the cabinet, and locate the motor. Inspect the coupler for any signs of damage, such as cracks or missing pieces. If it’s faulty, replace it with a new one.

4. Examine the Clutch Assembly

The clutch assembly plays a crucial role in engaging the drum during the spin cycle. If the clutch is worn out or damaged, it can prevent the drum from spinning. To inspect the clutch assembly, you’ll need to remove the washer’s cabinet and locate the clutch. Look for any signs of wear, such as excessive dust or metal shavings. If the clutch is faulty, it’s time for a replacement.

5. Test the Motor Control Board

The motor control board regulates the washer’s motor and ensures it functions correctly. If the control board is defective, it can disrupt the spin cycle. To test the motor control board, you’ll need a multimeter. Follow the manufacturer’s instructions to measure the board’s voltage output. If the readings are outside the recommended range, it’s likely that the control board needs to be replaced.

6. Check for Obstructions

Sometimes, a simple object lodged in the washer’s drum can prevent it from spinning. Check for any foreign objects, such as coins, buttons, or small garments, that may be obstructing the drum’s movement. Remove any obstructions and try running the spin cycle again.


Dealing with a Kenmore Washer 110.277216 that won’t spin can be a real headache. However, armed with the troubleshooting tips outlined in this article, you’ll be well-equipped to tackle the issue head-on. Remember to check the lid switch, inspect the drive belt, examine the motor coupler and clutch assembly, test the motor control board, and remove any obstructions. By following these steps, you’ll increase your chances of getting your washer back to its spinning glory. Now, go conquer that laundry pile with confidence!