Title: Kenmore Washer 110.2613241 Won’t Drain
Is your Kenmore Washer 110.2613241 giving you a headache by refusing to drain? Don’t worry, you’re not alone! Dealing with a washer that won’t drain can be frustrating, but with a little troubleshooting, you can get your laundry routine back on track. In this article, we’ll explore some common causes of a non-draining Kenmore Washer 110.2613241 and provide you with step-by-step solutions to fix the problem. So, let’s dive in and get your washer draining again!
1. The Basics: Check the Power Supply
Is Your Washer Plugged In?
Power Issues Can Cause Drainage Problems
Before diving into more complex issues, let’s start with the basics. Is your Kenmore Washer 110.2613241 properly plugged in? Sometimes, a loose or disconnected power cord can prevent the washer from draining. Ensure that the power cord is securely connected to an outlet and that the outlet is functioning correctly. If necessary, try plugging the washer into a different outlet to rule out any power supply issues.
2. Clogged Drain Hose
Is Your Drain Hose Clear?
A Clogged Drain Hose Can Cause Water Buildup
If your washer is still not draining, the next thing to check is the drain hose. Over time, debris, lint, and even small objects like coins or hairpins can accumulate in the drain hose, causing a blockage. To clear the drain hose, follow these steps:
Step 1: Unplug the Washer
Safety first! Make sure the washer is unplugged before proceeding.
Step 2: Locate the Drain Hose
The drain hose is usually located at the back of the washer. It is a flexible tube that connects the washer to the drainage system.
Step 3: Remove the Hose
Carefully detach the drain hose from both the washer and the drainage system. Be prepared for some water to spill out, so have a bucket or towels handy.
Step 4: Inspect and Clear the Hose
Inspect the drain hose for any clogs. Use a long brush or a straightened coat hanger to remove any debris or blockages. You can also run water through the hose to flush out any remaining obstructions.
Step 5: Reattach the Hose
Once the drain hose is clear, reconnect it to the washer and the drainage system. Ensure that the connections are tight and secure.
3. Pump Impeller Blockage
Is Your Pump Impeller Clogged?
A Blocked Pump Impeller Can Prevent Proper Drainage
If your drain hose is clear but your Kenmore Washer 110.2613241 still won’t drain, the issue might lie with a clogged pump impeller. The pump impeller is responsible for pumping water out of the washer during the drain cycle. Here’s how you can check and clear the pump impeller:
Step 1: Unplug the Washer
Always unplug the washer before performing any maintenance tasks.
Step 2: Access the Pump
The pump is usually located at the bottom of the washer. You may need to remove the front or back panel to access it. Consult your washer’s manual for specific instructions.
Step 3: Inspect and Clear the Impeller
Locate the pump impeller and check for any debris or blockages. Use a small brush or your fingers to remove any obstructions that might be preventing the impeller from spinning freely.
Step 4: Reassemble and Test
Once the impeller is clear, reassemble the washer and plug it back in. Run a test cycle to check if the drainage issue has been resolved.
4. Faulty Drain Pump
Is Your Drain Pump Malfunctioning?
A Faulty Drain Pump Can Cause Drainage Problems
If all else fails and your Kenmore Washer 110.2613241 still won’t drain, the drain pump itself may be faulty. The drain pump is responsible for pumping water out of the washer, and if it’s not functioning correctly, it can lead to drainage issues. Here’s what you can do:
Step 1: Unplug the Washer
As always, unplug the washer before performing any repairs.
Step 2: Remove the Drain Pump
Locate the drain pump, which is usually located at the bottom of the washer. Detach any connections and remove the pump from the washer.
Step 3: Test the Pump
Using a multimeter, test the drain pump for continuity. If there is no continuity, it indicates a faulty pump that needs to be replaced.
Step 4: Replace the Pump
If the drain pump is indeed faulty, you’ll need to replace it. Consult your washer’s manual or contact a professional for guidance on finding and installing a compatible replacement pump.
Conclusion:
Dealing with a Kenmore Washer 110.2613241 that won’t drain can be a frustrating experience. However, by following the troubleshooting steps outlined in this article, you can identify and resolve the issue causing the drainage problem. Remember to check the power supply, clear the drain hose, inspect the pump impeller, and replace the drain pump if necessary. With a little patience and DIY spirit, you’ll have your washer back to its draining glory in no time. Happy laundry days ahead!