Kenmore Washer 110.2613241 Fills Slowly Or Will Not Fill At All

Title: Kenmore Washer 110.2613241 Fills Slowly Or Will Not Fill At All

Are you facing the frustrating issue of your Kenmore washer 110.2613241 filling slowly or not filling at all? Don’t worry; you’re not alone! Many homeowners have encountered this problem, and in this article, we’ll explore the possible causes and solutions to help you get your washer back in working order. So, let’s dive right in and tackle this issue head-on!

Understanding the Problem:

Before we delve into the potential causes, let’s first understand why a Kenmore washer 110.2613241 may fill slowly or fail to fill altogether. The filling process is a crucial step in the washing cycle, as it ensures that the correct amount of water is available for the wash. When this process is disrupted, it can lead to inefficient or incomplete washing, leaving you with unsatisfactory results.

Possible Causes and Solutions:

1. Water Supply Issue:

One of the most common reasons for a slow or no-fill problem is a restricted water supply. Check if the water valves are fully open and the water pressure is adequate. Sometimes, sediment or debris can clog the inlet valve screens, hindering the water flow. In such cases, you can clean the screens or replace them if necessary.

2. Faulty Water Inlet Valve:

The water inlet valve controls the flow of water into the washer. If it is defective, it can cause slow or no filling. To determine if the valve is the culprit, you can perform a simple test. Disconnect the water supply, remove the valve, and inspect it for any signs of damage or blockage. If you notice any issues, it’s time to replace the valve.

3. Clogged Water Inlet Hose:

Over time, mineral deposits and debris can accumulate in the water inlet hose, restricting the flow of water. Inspect the hose for any blockages or kinks. If you find any, remove the hose and clean it thoroughly. Consider replacing the hose if it is old or damaged.

4. Malfunctioning Pressure Switch:

The pressure switch is responsible for detecting the water level in the washer and signaling the water inlet valve to shut off once the desired level is reached. If the pressure switch is faulty, it may not detect the water level accurately, leading to slow or no filling. Consult a professional technician to diagnose and replace the pressure switch if needed.

5. Defective Timer or Control Board:

In some cases, the issue may lie with the timer or control board. These components control the various functions of the washer, including the filling process. If they are malfunctioning, they may not send the correct signals to initiate the filling cycle. Contact a qualified technician to inspect and replace these parts if necessary.

6. Problems with the Water Level Sensor:

The water level sensor ensures that the washer fills with the appropriate amount of water. If it is faulty, it may not accurately detect the water level, resulting in slow or no filling. Check the sensor for any damage or loose connections. If needed, replace the sensor to resolve the issue.

7. Other Potential Causes:

There are a few other less common causes that could lead to slow or no filling. These include a faulty motor, a defective door lock switch, or a malfunctioning control panel. If you have exhausted all other possibilities and the problem persists, it’s best to seek professional assistance to diagnose and rectify the issue.


Dealing with a Kenmore washer 110.2613241 that fills slowly or not at all can be frustrating, but with a systematic approach, you can identify and resolve the problem. From checking the water supply to inspecting various components, there are several potential causes to consider. By following the solutions provided in this article, you can hopefully get your washer back to its optimal performance and enjoy clean, fresh laundry once again. Remember, if all else fails, don’t hesitate to seek professional help. Happy washing!