Kenmore Washer 110.2513241 Won’T Drain

Title: Kenmore Washer 110.2513241 Won’t Drain

Have you ever faced the frustrating situation where your Kenmore Washer 110.2513241 refuses to drain? It’s a common problem that can leave you scratching your head and wondering what to do next. But fear not! In this blog post, we will explore the possible causes of this issue and provide you with some simple troubleshooting steps to get your washer back up and running smoothly.

Understanding the Problem:

When your Kenmore Washer 110.2513241 won’t drain, it can be due to various factors. It’s essential to understand the potential causes before jumping into any solutions. Let’s dive into some of the common culprits:

1. Clogged Drain Hose:
A clogged drain hose is one of the most typical reasons for a washer not draining. Over time, debris and lint can accumulate in the hose, causing a blockage. This blockage prevents the water from draining properly, leaving you with a washer full of water.

2. Faulty Drain Pump:
The drain pump plays a vital role in removing water from the washer. If the pump is faulty or damaged, it won’t be able to perform its job effectively, resulting in water remaining in the tub.

3. Lid Switch Malfunction:
The lid switch is a safety feature that prevents the washer from spinning or draining when the lid is open. If the lid switch is malfunctioning, it can disrupt the drainage process, leaving water in the tub.

4. Clogged Pump Filter:
The pump filter is responsible for catching any debris or lint that may have escaped the drain hose. Over time, this filter can become clogged, hindering the draining process.

Troubleshooting Steps:

Now that we have identified some potential causes let’s move on to troubleshooting steps to fix the issue:

1. Check the Drain Hose:
Start by inspecting the drain hose for any clogs or kinks. Disconnect the hose from the washer and check for any debris or blockages. If you find any, clear them out using a long brush or pipe cleaner. Ensure the hose is properly connected and not bent or twisted.

2. Test the Drain Pump:
To check if the drain pump is working correctly, you can manually activate it. Refer to your washer’s manual for specific instructions on how to access the pump. Once you locate it, manually turn the pump’s impeller to check for any obstructions. If you find any debris, remove it carefully. If the pump appears to be damaged or faulty, it may need to be replaced.

3. Inspect the Lid Switch:
To determine if the lid switch is causing the problem, open and close the lid of your washer. If you don’t hear a clicking sound when you close the lid, the switch might be faulty. In such cases, you may need to replace the lid switch to restore proper drainage.

4. Clean the Pump Filter:
Locate the pump filter, usually located at the bottom front of the washer. Place a towel or bucket beneath it to catch any water that may spill out. Unscrew the filter and carefully remove any debris or lint. Clean the filter thoroughly before reattaching it to the washer.

5. Seek Professional Help:
If you have tried all the above steps and your Kenmore Washer 110.2513241 still won’t drain, it may be time to seek professional assistance. A certified technician will have the expertise and tools to diagnose and fix the issue efficiently.


Dealing with a Kenmore Washer 110.2513241 that won’t drain can be incredibly frustrating. However, by understanding the potential causes and following the troubleshooting steps mentioned above, you can resolve the issue and get your washer back in working order. Remember to check the drain hose, inspect the drain pump, test the lid switch, clean the pump filter, and seek professional help if needed. With a little bit of patience and effort, you’ll have your washer draining properly in no time.