Kenmore Washer 110.2235251 Won’T Start

Kenmore Washer 110.2235251 Won’t Start

Have you ever encountered the frustrating situation where your Kenmore Washer 110.2235251 refuses to start? It can be quite perplexing, especially when you have a pile of dirty laundry waiting to be cleaned. But fear not, as we’re here to help you troubleshoot and fix this issue. In this blog post, we’ll explore some common reasons why your Kenmore Washer won’t start and provide you with practical solutions to get it up and running again.

1. Check the Power Supply:

The first thing you should do is check if your washer is receiving power. It might seem obvious, but sometimes the simplest solutions are the most effective. Ensure that the power cord is securely plugged into a functioning power outlet. If you’re using an extension cord, make sure it’s in good condition and can handle the washer’s power requirements. Additionally, check if there’s a blown fuse or a tripped circuit breaker in your home’s electrical panel.

2. Examine the Control Panel:

Next, inspect the control panel on your Kenmore Washer. Sometimes, a faulty control panel can prevent the washer from starting. Look for any visible damage, loose connections, or unresponsive buttons. If you notice any issues, consider replacing the control panel or seeking professional help.

3. Verify the Door/Lid Switch:

Many washers have a door or lid switch that ensures the machine doesn’t start if the door or lid is open. If this switch is faulty or not engaging properly, it can prevent the washer from starting. Inspect the switch for any signs of damage or wear. You can also try manually pressing and releasing the switch to see if it’s functioning correctly. If necessary, replace the switch to fix the issue.

4. Examine the Water Inlet Valve:

The water inlet valve is responsible for allowing water to enter the washer. If this valve is defective, the washer may not start. Check if the water inlet valve is clogged or malfunctioning. You can do this by disconnecting the water supply hoses and inspecting the valve for any blockages or damage. If needed, replace the water inlet valve to resolve the problem.

5. Inspect the Motor Coupling:

The motor coupling connects the motor to the transmission in your washer. If it’s broken or worn out, the washer won’t start. To check the motor coupling, you’ll need to access the washer’s motor. Disconnect the power, remove the cabinet, and locate the motor. Inspect the coupling for any signs of damage or wear. If necessary, replace the motor coupling to get your washer running again.

6. Test the Motor:

A faulty motor can also be the culprit behind your Kenmore Washer not starting. To test the motor, you’ll need a multimeter. Disconnect the power, locate the motor, and test its continuity using the multimeter. If the motor fails the continuity test, it’s likely defective and needs to be replaced.

7. Check the Drive Belt:

The drive belt transfers power from the motor to the drum in your washer. If it’s broken or worn out, the washer won’t start or spin. Inspect the drive belt for any signs of damage or wear. If necessary, replace the drive belt to restore functionality to your Kenmore Washer.

8. Examine the Timer Control:

The timer control regulates the different cycles and operations of your washer. If it’s defective, the washer may not start or advance through the cycles correctly. Inspect the timer control for any visible damage or loose connections. If needed, replace the timer control to fix the issue.

9. Clean the Filter:

A clogged filter can also prevent your Kenmore Washer from starting. Locate the filter, which is usually at the bottom front of the machine, and remove any debris or lint that may have accumulated. Cleaning the filter regularly can help prevent future issues and keep your washer running smoothly.

10. Seek Professional Help:

If you’ve tried all the above troubleshooting steps and your Kenmore Washer 110.2235251 still won’t start, it’s time to seek professional assistance. Contact a qualified technician or the Kenmore customer support team to diagnose and repair the problem accurately.


Dealing with a Kenmore Washer 110.2235251 that won’t start can be a real headache. However, by following the troubleshooting steps mentioned in this article, you can identify and resolve the issue. Remember to check the power supply, inspect the control panel, verify the door/lid switch, examine the water inlet valve, inspect the motor coupling, test the motor, check the drive belt, examine the timer control, and clean the filter. If all else fails, don’t hesitate to seek professional help. Soon enough, you’ll have your washer up and running, ready to tackle that mountain of laundry.