Kenmore Washer 110.2235251 Won’T Spin

Title: Kenmore Washer 110.2235251 Won’t Spin

Hey there! So, you’re facing a little trouble with your Kenmore Washer 110.2235251, huh? Don’t worry, we’ve got your back! In this blog post, we’ll delve into the common reasons why your washer might refuse to spin and provide you with some handy troubleshooting tips to get it back up and running smoothly. Let’s dive right in!

1. The Spin Cycle: A Crucial Component

Ah, the spin cycle – a crucial part of any washing machine. It’s responsible for removing excess water from your clothes, leaving them ready for drying. But what happens when this essential feature refuses to do its job? Let’s find out!

2. Power Issues: The First Thing to Check

First things first, let’s make sure your washer is getting the power it needs. Check if the power cord is properly plugged in and that there’s no issue with the electrical outlet. Sometimes, a loose connection or a tripped circuit breaker can be the culprit behind the non-spinning washer.

3. Lid Switch: A Safety Measure

Your Kenmore washer is equipped with a lid switch that ensures the machine won’t start spinning if the lid is open. If the switch is faulty or not engaging properly, it might prevent the spin cycle from starting. Try closing the lid firmly and listen for a clicking sound indicating that the switch is functioning.

4. Drive Belt: A Common Culprit

The drive belt is responsible for transferring power from the motor to the transmission, enabling the spin cycle to commence. Over time, the belt can become worn or stretched, causing it to slip or break. Inspect the belt for any signs of damage, such as fraying or cracking. If you notice any issues, it’s time to replace it.

5. Motor Coupling: A Connection Problem

The motor coupling connects the washer’s motor to the transmission. If it becomes worn or damaged, the spin cycle won’t initiate. To check this, remove the washer’s cabinet and inspect the coupling. Look for any signs of wear, such as broken or cracked pieces. If it’s faulty, replacing the motor coupling should do the trick.

6. Clutch Assembly: The Enabler of Spinning

The clutch assembly engages the transmission, allowing the washer to spin. If it’s worn out or damaged, your washer won’t spin. A faulty clutch assembly might produce a loud grinding noise during operation. If this is the case, it’s time to replace the clutch assembly.

7. Drive Motor: The Powerhouse

The drive motor is responsible for spinning the washer’s drum. If it’s malfunctioning, your washer won’t spin. Listen for any unusual noises coming from the motor during operation. If you suspect a problem, it’s best to call a professional technician to diagnose and repair the motor.

8. Transmission: The Gear Shifter

The transmission in your washer controls the spinning and agitating motions. If it’s faulty, your washer won’t spin. Look for any leaks or signs of damage around the transmission. If you suspect an issue, it’s advisable to seek professional help for repairing or replacing the transmission.

9. Control Board: The Brain of Your Washer

Modern washers rely on control boards to regulate various functions. If the control board is malfunctioning, it might prevent the spin cycle from starting. Check for any error codes or unusual behavior displayed on the control panel. If you’re unsure, consulting a professional technician is the way to go.

10. Overloading: Too Much of a Good Thing

Sometimes, the simplest explanation is the correct one. Overloading your washer with a heavy load can put excessive strain on the motor and prevent it from spinning. Make sure you’re following the manufacturer’s guidelines for load capacity to avoid this issue.


Phew! We’ve covered quite a bit of ground here. From power issues to faulty components, we’ve explored the common reasons why your Kenmore Washer 110.2235251 might refuse to spin. Remember, troubleshooting can be a bit of trial and error, so don’t get discouraged if the first attempt doesn’t solve the problem. If you’re unsure or uncomfortable with DIY repairs, it’s always best to consult a professional technician. Happy washing!