Title: Kenmore Dryer 110.7513241 Drum Not Turning
Hey there! Are you facing a frustrating situation where your Kenmore Dryer 110.7513241’s drum is refusing to spin? Don’t worry, I’ve got your back! In this blog post, we’ll dive into the possible causes behind this issue and explore some simple troubleshooting steps to get your dryer back in action. So, let’s roll up our sleeves and get ready to fix that stubborn drum!
Understanding the Drum Mechanism
Before we jump into troubleshooting, let’s take a moment to understand how the drum in your Kenmore Dryer 110.7513241 works. The drum is responsible for tumbling and drying your clothes. It is powered by a motor and a belt that connects the motor to the drum. When the motor spins, it rotates the drum, allowing the clothes to move around and dry evenly.
Possible Causes for Drum Not Turning
1. Broken Drive Belt: One of the common reasons for a drum not turning is a broken drive belt. Over time, the belt can wear out or snap, causing the drum to lose its connection to the motor. If you hear the motor running but the drum remains stationary, a broken drive belt could be the culprit.
2. Faulty Motor: Another possibility is a faulty motor. If the motor is not functioning properly, it may lack the power to turn the drum. This can happen due to worn-out motor brushes, electrical issues, or motor failure. If you don’t hear any noise from the motor when you start the dryer, it’s worth checking the motor as a potential cause.
3. Jammed Drum Rollers: Drum rollers are small wheels that support the drum’s movement. Over time, these rollers can become jammed or worn out, preventing the drum from spinning smoothly. If you notice any squeaking or grinding noises coming from your dryer, it could be an indication of jammed drum rollers.
4. Broken Idler Pulley: The idler pulley keeps tension on the drive belt, allowing it to rotate the drum. If the idler pulley is broken or worn out, it won’t apply enough tension to the belt, resulting in a stationary drum. A squealing or rattling sound may accompany this issue.
5. Defective Start Switch: The start switch is responsible for initiating the dryer’s operation. If it is defective or not engaging properly, the drum won’t start spinning. Check if the start switch feels loose or if there are any visible signs of damage.
Troubleshooting Steps
Now that we have a good understanding of the potential causes, let’s move on to some troubleshooting steps to help you fix the drum not turning issue on your Kenmore Dryer 110.7513241.
Step 1: Safety First
Before diving into any repairs, always ensure the dryer is unplugged from the power source. Safety should be your top priority throughout the troubleshooting process.
Step 2: Inspect the Drive Belt
Start by accessing the dryer’s belt. You may need to remove the dryer’s front or rear panel, depending on the model. Once you have access, check the condition of the drive belt. If it appears worn, frayed, or broken, it’s time to replace it. Consult your dryer’s manual or manufacturer’s website for specific instructions on belt replacement.
Step 3: Check the Motor
If the drive belt seems fine, the next step is to inspect the motor. Ensure the dryer is still unplugged, then locate the motor and visually inspect it for any visible damage. If you suspect a faulty motor, it’s best to consult a professional technician to diagnose and repair the issue.
Step 4: Examine the Drum Rollers
Now, let’s move on to the drum rollers. These are typically located at the back of the dryer. Carefully examine them for any signs of wear, damage, or obstruction. If they appear jammed or worn out, it’s advisable to replace them. Again, refer to your dryer’s manual or manufacturer’s website for specific instructions.
Step 5: Inspect the Idler Pulley
Next, check the idler pulley. It should be located near the motor and drive belt area. Look for any visible signs of damage or wear. If the pulley seems broken or worn out, it’s time to replace it. Remember to follow the manufacturer’s instructions for proper installation.
Step 6: Test the Start Switch
Lastly, test the start switch for any defects. Gently press and release the switch while listening for a clicking sound. If the switch feels loose or doesn’t produce a clicking sound, it may need to be replaced. Contact a professional technician for assistance in replacing the start switch.
Conclusion
Congratulations! You’ve made it through the troubleshooting steps to fix the drum not turning issue on your Kenmore Dryer 110.7513241. By following these simple steps and inspecting the drive belt, motor, drum rollers, idler pulley, and start switch, you should be able to pinpoint the cause and resolve the problem.
Remember, if you’re not comfortable performing any of the repairs yourself, it’s always best to seek professional help. They have the expertise and tools to ensure a safe and effective repair.
Now, go ahead and give your Kenmore Dryer 110.7513241 the TLC it needs. Soon enough, you’ll be back to enjoying fresh, dry clothes hassle-free!