Title: Kenmore Dryer 110.6810231 Drum Not Turning
Is your Kenmore Dryer 110.6810231 giving you a hard time with its drum not turning? Don’t worry, you’re not alone! Many homeowners face this issue, but luckily, there are solutions to get your dryer back up and running. In this blog post, we will explore the common causes of a non-turning drum in your Kenmore Dryer 110.6810231 and provide step-by-step instructions on how to fix it. So, let’s dive in and get your dryer spinning again!
Understanding the Drum Mechanism
The drum in your Kenmore Dryer 110.6810231 is responsible for tumbling and drying your clothes. It is driven by a motor and a belt that wraps around the drum and pulley system. When the drum fails to turn, it disrupts the drying process. Let’s explore the possible causes and solutions.
Check the Drive Belt
One of the most common reasons for a non-turning drum is a broken or loose drive belt. To check the belt, unplug the dryer and remove the top or front panel, depending on the model. Locate the belt and inspect it for any signs of damage or wear. If you notice any issues, it’s time to replace the belt.
Replacing the Drive Belt
Replacing the drive belt in your Kenmore Dryer 110.6810231 is a relatively simple process. Start by disconnecting the power and removing the top or front panel. Release the tension on the belt by loosening the idler pulley. Slip the old belt off the drum and pulley system, and then slide the new belt onto the drum. Reattach the front or top panel and plug the dryer back in. Your drum should now start turning smoothly.
Inspecting the Motor
If the drive belt appears to be in good condition, the next step is to inspect the motor. A faulty motor can prevent the drum from turning. To check the motor, you’ll need to remove the dryer’s back panel. Look for any signs of damage, overheating, or loose connections. If you identify any issues, it’s best to consult a professional for motor repair or replacement.
Testing the Start Switch
The start switch in your Kenmore Dryer 110.6810231 plays a crucial role in initiating the motor’s operation. If the switch is faulty, it can prevent the drum from turning. To test the start switch, unplug the dryer and locate the switch behind the control panel. Use a multimeter to check for continuity when the switch is pressed. If there is no continuity, the switch is defective and needs to be replaced.
Troubleshooting the Idler Pulley
The idler pulley is another component that can cause the drum to stop turning. Over time, the pulley can become worn out or stuck, preventing the belt from maintaining tension. To troubleshoot the idler pulley, unplug the dryer and locate the pulley near the motor. Inspect it for any signs of damage or obstructions. If necessary, replace the pulley to restore proper tension to the drive belt.
Checking the Drum Rollers
Worn-out drum rollers can also lead to a non-turning drum in your Kenmore Dryer 110.6810231. These rollers support the drum as it rotates. If they become damaged or worn, they can impede the drum’s movement. To inspect the drum rollers, unplug the dryer and remove the front or back panel. Look for any signs of wear or damage. If needed, replace the rollers to ensure smooth drum rotation.
Lubricating the Drum Rollers
If the drum rollers appear to be in good condition, but the drum is still not turning smoothly, lubrication may be the solution. Apply a small amount of high-temperature lubricant to the rollers’ axles, ensuring they can rotate freely. This simple step can often resolve the issue and restore proper drum movement.
Testing the Drive Motor Switch
The drive motor switch is responsible for activating the motor when the drum needs to turn. If this switch is defective, it can prevent the drum from rotating. To test the drive motor switch, unplug the dryer and locate it near the motor. Use a multimeter to check for continuity when the switch is pressed. If there is no continuity, the switch needs to be replaced.
Verifying the Timer Motor
The timer motor controls the duration of the drying cycle. If it malfunctions, it can cause the drum to stop turning. To verify the timer motor, unplug the dryer and access the timer assembly. Test the motor’s functionality using a multimeter. If the motor is faulty, it should be replaced to restore proper drum rotation.
Inspecting the Drum Bearing
A worn-out drum bearing can also lead to a non-turning drum. The drum bearing supports the rear of the drum and allows it to rotate smoothly. If it becomes damaged or worn, it can impede the drum’s movement. To inspect the drum bearing, unplug the dryer and remove the front or back panel. Look for any signs of wear or damage. If needed, replace the drum bearing to ensure proper drum rotation.
Cleaning the Drum
Sometimes, a drum that refuses to turn can be due to excessive lint or debris buildup. Over time, lint can accumulate and hinder the drum’s movement. To clean the drum, unplug the dryer and remove the front or back panel. Use a vacuum cleaner or a lint brush to remove any lint or debris from the drum’s interior. Regular cleaning can help prevent future issues with drum rotation.
Reassembling and Testing
Once you have addressed the underlying cause of the non-turning drum in your Kenmore Dryer 110.6810231, it’s time to reassemble the dryer. Follow the steps in reverse order, ensuring all connections are secure. Plug the dryer back in and run a test cycle to verify that the drum is now turning smoothly.
Conclusion:
Dealing with a Kenmore Dryer 110.6810231 drum that refuses to turn can be frustrating, but with the right troubleshooting steps, you can get it back in working order. By checking the drive belt, inspecting the motor, testing the start switch, troubleshooting the idler pulley and drum rollers, and verifying other components, you can identify and resolve the issue. Remember to always prioritize safety and consult a professional if you’re unsure about any repairs. Now, go ahead and bring life back to your dryer by getting that drum spinning again!