Title: Kenmore Dryer 110.6800201 Drum Not Turning
Hey there! If you’re reading this article, chances are you’re facing an issue with your Kenmore Dryer 110.6800201. Don’t worry, we’ve got your back! In this guide, we’ll walk you through the common reasons why your dryer drum might not be turning and provide you with some simple troubleshooting steps to help you get it spinning again. So, let’s dive right in!
1. The Power Supply: Is It Plugged In?
H1 Check the Power Connection
The First Step to Troubleshooting
Before we dive into more complex issues, let’s start with the basics. It may sound obvious, but sometimes the simplest solution is the most effective. Make sure your Kenmore Dryer is properly plugged into a working power outlet. Sometimes, due to accidental tugs or loose connections, the power supply can become disconnected, causing the drum to stop turning.
2. The Start Switch: Is It Working?
H1 Inspect the Start Switch
A Potential Culprit
If your dryer is plugged in and the drum still refuses to turn, it’s time to inspect the start switch. The start switch is responsible for initiating the motor’s rotation. Over time, it can wear out or get stuck, preventing the drum from spinning. To check if the start switch is faulty, simply press it and listen for a clicking sound. If you don’t hear anything, it might be time to replace the switch.
3. The Drive Belt: Is It Broken or Loose?
H1 Examine the Drive Belt
A Common Cause of Drum Issues
One of the most common reasons for a non-turning drum is a broken or loose drive belt. The drive belt connects the motor to the drum, enabling it to rotate. Over time, the belt can wear out, become frayed, or even snap. To check if the drive belt is the culprit, unplug the dryer and remove the front panel. Inspect the belt for any signs of damage or looseness. If you notice any issues, it’s time to replace the belt with a new one.
4. The Motor: Is It Faulty?
H1 Assess the Motor
A Potential Source of Trouble
If you’ve ruled out the power supply, start switch, and drive belt as potential causes, it’s time to turn your attention to the motor. The motor is the heart of your dryer, providing the necessary power to spin the drum. Over time, motors can wear out or become faulty, leading to a non-turning drum. To check if the motor is the problem, you may need to consult a professional technician who can perform a thorough inspection and provide the necessary repairs or replacements.
5. The Drum Roller: Is It Worn Out?
H1 Check the Drum Rollers
A Silent Culprit
Another possible reason for a drum that refuses to turn is worn-out drum rollers. Drum rollers support the drum’s movement and can wear down over time due to regular use. To check if the drum rollers are the issue, unplug the dryer and remove the front or rear panel. Inspect the rollers for signs of wear, such as flat spots or excessive play. If they appear damaged, it’s advisable to replace them to ensure smooth drum rotation.
6. The Idler Pulley: Is It Faulty?
H1 Inspect the Idler Pulley
A Hidden Culprit
The idler pulley plays a crucial role in maintaining tension on the drive belt, allowing the drum to rotate smoothly. If the idler pulley becomes faulty or worn out, it can cause the belt to slip or become loose, resulting in a non-turning drum. To check the idler pulley, unplug the dryer and remove the front or rear panel. Inspect the pulley for any signs of damage or excessive wear. If it’s damaged, it’s time to replace it with a new one.
Conclusion:
Congratulations! You’ve made it through our troubleshooting guide for the Kenmore Dryer 110.6800201 drum not turning issue. By following these simple steps, you can identify and resolve the most common causes of a non-turning drum. Remember, if you’re unsure about any repairs or replacements, it’s always best to consult a professional technician who can provide expert advice and assistance. Now go ahead, put your newfound knowledge to use, and get that drum spinning again!