Title: Kenmore Dryer 110.628221 Won’t Stop
Have you ever had a frustrating experience with your Kenmore Dryer 110.628221 that just won’t stop running? You’re not alone! Many people have faced this issue, and it can be quite perplexing. In this blog article, we will delve into the possible causes of this problem and provide you with some helpful solutions. So, let’s get started and put an end to that never-ending drying cycle!
Understanding the Issue:
Imagine this: you load your clothes into the dryer, set the timer, and walk away, expecting to return later to find them perfectly dry. However, when you come back, you discover that the dryer is still running, long after it should have finished. Frustrating, right? Well, fear not, as we’re here to help you troubleshoot this issue.
Possible Causes:
1. Faulty Timer:
One of the most common reasons for a dryer not stopping is a faulty timer. The timer controls the duration of the drying cycle, and if it malfunctions, it can cause the dryer to continue running indefinitely. To check if the timer is the culprit, simply turn it manually and see if the dryer stops. If it does, you may need to replace the timer.
2. Defective Door Switch:
Another possible cause of the never-ending drying cycle is a defective door switch. The door switch is responsible for detecting whether the dryer door is open or closed. If it fails to detect that the door is open, the dryer will keep running. Check if the door switch is loose, damaged, or not functioning properly. If needed, replace it with a new one.
3. Stuck or Faulty Start Switch:
The start switch is what initiates the drying cycle when you press it. If the start switch gets stuck or becomes faulty, it can lead to the dryer continuously running. Inspect the start switch for any visible issues and replace it if necessary.
4. Malfunctioning Cycling Thermostat:
The cycling thermostat is responsible for regulating the temperature inside the dryer. If it malfunctions and fails to signal the dryer to stop when the desired temperature is reached, the dryer will continue running. Consider checking the cycling thermostat for any signs of damage or malfunction and replace it if needed.
5. Clogged Venting System:
A clogged venting system can also cause the dryer to run endlessly. When the venting system is obstructed, the hot air cannot escape properly, leading to longer drying times. This can give the impression that the dryer won’t stop. Ensure that the venting system is clean and free from any obstructions to allow proper airflow.
Solutions:
1. Replace the Timer:
If you suspect a faulty timer, replacing it may solve the issue. Consult your Kenmore dryer’s manual or contact a professional technician for guidance on finding and installing the appropriate replacement timer.
2. Check and Replace the Door Switch:
Inspect the door switch for any visible damage or loose connections. If necessary, replace it with a new one. Make sure to follow the manufacturer’s instructions or seek professional help if you’re unsure.
3. Test and Replace the Start Switch:
If the start switch seems stuck or faulty, test it by pressing it multiple times to see if it releases. If it doesn’t, consider replacing it with a new start switch.
4. Replace the Cycling Thermostat:
If the cycling thermostat appears damaged or malfunctioning, replacing it might resolve the issue. Consult the dryer’s manual or seek professional assistance to ensure you choose the correct replacement part.
5. Clean the Venting System:
Regularly clean the venting system to prevent any blockages. Use a vacuum cleaner or a vent brush to remove lint and debris. Ensure that the venting system is properly installed and not kinked or crushed.
Conclusion:
Dealing with a Kenmore Dryer 110.628221 that won’t stop can be frustrating, but with the right troubleshooting steps, you can resolve the issue and get back to enjoying dry clothes in no time. Remember to check the timer, door switch, start switch, cycling thermostat, and the venting system for any potential problems. If you’re unsure or uncomfortable with any repairs, it’s always best to seek the help of a professional technician. So, don’t let that never-ending drying cycle get you down – take action and get your dryer back on track!