Title: Kenmore Dishwasher 665.14573N611 Won’t Fill
Hey there! Are you facing a frustrating situation where your Kenmore Dishwasher 665.14573N611 won’t fill with water? Well, worry not, because I’m here to help you troubleshoot and fix this issue. In this blog post, we’ll explore the possible causes behind this problem and provide you with some practical solutions. So, let’s dive right in and get your dishwasher back up and running!
1. Understanding the Dishwasher’s Filling Process
Before we jump into troubleshooting, let’s take a moment to understand how a dishwasher fills with water. When you start a wash cycle, the dishwasher’s water inlet valve opens to allow water to flow into the tub. This valve is controlled by an electronic solenoid that receives signals from the dishwasher’s control board.
2. Check the Water Supply
The first thing you need to do is ensure that your dishwasher is receiving an adequate water supply. Check if the water supply valve, usually located under your kitchen sink, is fully open. Sometimes, it can accidentally get closed or partially closed, restricting water flow to the dishwasher.
3. Inspect the Water Inlet Valve
If the water supply is not the issue, the next step is to inspect the water inlet valve. This valve is responsible for allowing water to enter the dishwasher. Start by turning off the dishwasher and disconnecting it from the power source. Locate the water inlet valve, usually found behind the lower access panel. Check if there are any visible signs of damage or clogs. If you notice any issues, it’s best to replace the valve.
4. Test the Water Inlet Valve
To determine if the water inlet valve is functioning correctly, you can perform a simple test. With the dishwasher still disconnected from the power source, use a multimeter to check for continuity across the valve’s terminals. If there is no continuity, it indicates a faulty valve that needs to be replaced.
5. Clean the Float Assembly
The float assembly is a small device located at the bottom of the dishwasher’s tub. Its purpose is to monitor the water level and prevent overfilling. Sometimes, debris or food particles can get trapped in the float assembly, causing it to get stuck in the raised position. This can trick the dishwasher into thinking it’s already filled, preventing it from filling with water. Clean the float assembly thoroughly and ensure it moves freely.
6. Check the Float Switch
The float switch is another component that works in conjunction with the float assembly. It sends a signal to the dishwasher’s control board when the water level is too high. If the float switch is faulty or stuck, it can disrupt the filling process. Inspect the switch for any signs of damage or obstruction. If necessary, replace the float switch.
7. Examine the Water Inlet Hose
The water inlet hose connects the dishwasher to the water supply. Over time, it can become kinked or clogged, hindering water flow. Check the hose for any twists, bends, or blockages. Straighten out any kinks and remove any debris that might be blocking the water flow.
8. Clean the Filters
Dishwashers have filters that prevent food particles and debris from clogging the water pump or spraying onto your dishes. If these filters become excessively dirty, they can impede water flow. Remove the filters and clean them thoroughly under running water. Ensure there are no obstructions before reinstalling them.
9. Inspect the Water Pump
The water pump is responsible for circulating water throughout the dishwasher. If it’s not functioning correctly, it can prevent water from filling the dishwasher. Check the pump for any signs of damage or blockages. If necessary, replace the water pump to resolve the issue.
10. Verify the Control Board
In some cases, a malfunctioning control board can be the culprit behind the dishwasher not filling with water. If none of the above solutions work, consider checking the control board for any visible signs of damage or burnt components. If you suspect a faulty control board, it’s best to consult a professional technician for further diagnosis and repair.
Conclusion:
By now, you should have a good understanding of the possible causes and solutions for your Kenmore Dishwasher 665.14573N611 not filling with water. Remember to check the water supply, inspect the water inlet valve, clean the float assembly, examine the float switch, inspect the water inlet hose, clean the filters, and inspect the water pump. If all else fails, consider checking the control board. Hopefully, one of these solutions will get your dishwasher back to its full working capacity. Happy dishwashing!