Title: Kenmore Dishwasher 665.13222N414 Lights Flashing Or Blinking
Is your Kenmore dishwasher model 665.13222N414 acting up with lights flashing or blinking? Don’t worry, we’ve got you covered! In this article, we’ll explore the possible causes behind this issue and provide you with some troubleshooting tips to help you get your dishwasher back up and running smoothly. So, let’s dive in and solve this problem together!
1. Understanding the Issue:
When the lights on your Kenmore dishwasher start flashing or blinking, it can be frustrating and confusing. However, this issue often indicates that something is amiss and needs attention. The flashing or blinking lights serve as warning signs, alerting you to potential problems within the dishwasher.
2. Check the Control Panel:
Begin by examining the control panel. Look for any buttons that may be stuck or pressed down. Sometimes, a stuck button can cause the lights to flash or blink. Gently press each button to ensure they are not stuck or jammed.
3. Power Cycle the Dishwasher:
Performing a power cycle can sometimes resolve minor glitches in the dishwasher’s system. Start by turning off the dishwasher and unplugging it from the power source. Wait for a few minutes before plugging it back in and turning it on. This simple reset might clear any temporary issues causing the lights to blink.
4. Inspect the Door Latch:
A faulty door latch can trigger the lights to flash or blink. Check if the door latch is properly secured and not damaged. If you notice any issues, such as a broken latch or misalignment, it may need to be replaced. Contact a professional technician for assistance in replacing the door latch.
5. Check the Water Supply:
A disrupted water supply can also lead to blinking lights on your Kenmore dishwasher. Ensure that the water supply valve is fully open and that the water pressure is adequate. Inspect the water inlet hose for any kinks or blockages that may be hindering the water flow. Clear any obstructions and straighten the hose if necessary.
6. Clean the Filters:
Clogged filters can cause the dishwasher to malfunction and the lights to blink. Locate the filters inside the dishwasher and remove them for cleaning. Rinse them under running water to remove any debris or food particles. Once cleaned, reinstall the filters back into their original positions.
7. Examine the Drain Hose:
A blocked or kinked drain hose can disrupt the dishwasher’s drainage system, resulting in flashing lights. Inspect the drain hose for any clogs or bends that may be obstructing the water flow. If you find any blockages, remove them carefully. Straighten any kinks in the hose to ensure proper drainage.
8. Check for Error Codes:
Kenmore dishwashers often display error codes when something goes wrong. Consult your dishwasher’s manual to identify the specific error code associated with the flashing lights. Understanding the error code can provide valuable insight into the underlying issue, allowing you to troubleshoot more effectively.
9. Inspect the Heating Element:
A malfunctioning heating element can cause the lights on your Kenmore dishwasher to blink. Check the heating element for any signs of damage or burning. If you notice any issues, it may need to be replaced. Contact a professional technician to diagnose and replace the heating element if necessary.
10. Test the Control Board:
The control board is the brain of your dishwasher, and a faulty one can lead to various problems, including blinking lights. If you’ve tried all the previous steps without success, it’s time to test the control board. Contact a professional technician who can properly diagnose and repair or replace the control board if needed.
11. Call for Professional Help:
If you’ve exhausted all troubleshooting options and the lights on your Kenmore dishwasher continue to flash or blink, it’s best to seek professional assistance. A certified technician will have the expertise and knowledge to diagnose and resolve the issue effectively, ensuring your dishwasher is back to its optimal performance.
Conclusion:
Dealing with flashing or blinking lights on your Kenmore dishwasher can be frustrating, but with the right troubleshooting steps, you can identify and resolve the underlying issues. Remember to check the control panel, power cycle the dishwasher, inspect the door latch, ensure proper water supply, clean the filters, examine the drain hose, check for error codes, inspect the heating element, test the control board, and seek professional help if needed. By following these steps, you’ll be well on your way to getting your Kenmore dishwasher 665.13222N414 back in working order in no time!