Title: Kenmore Dishwasher 665.12793K311 Won’t Fill
Hey there! Are you facing a frustrating issue with your Kenmore dishwasher model 665.12793K311? Don’t worry, we’ve got you covered! In this article, we’ll dive into the common problem of a dishwasher that won’t fill with water. We’ll explore some possible causes and provide you with practical troubleshooting tips to get your dishwasher back up and running in no time. So, let’s roll up our sleeves and get to the bottom of this!
1. Understanding the Dishwasher Filling Process:
Before we delve into troubleshooting, let’s quickly understand how a dishwasher fills with water. When you start a wash cycle, the dishwasher’s water inlet valve opens, allowing water to flow into the appliance. The water then fills the tub to the appropriate level, ensuring efficient cleaning. However, if your Kenmore dishwasher isn’t filling, it can be due to several reasons.
2. Check the Water Supply:
First things first, let’s make sure the water supply to your dishwasher is not interrupted. Check if the water supply valve, usually located under the sink, is fully open. Sometimes, it may accidentally get closed, causing the dishwasher to not fill. Ensure the valve is turned on and the water supply is uninterrupted.
3. Inspect the Water Inlet Valve:
The water inlet valve is responsible for controlling the water flow into the dishwasher. A faulty or clogged valve can prevent water from entering the appliance. To inspect the valve, you’ll need to locate it behind the lower access panel or at the bottom of the dishwasher. Check for any visible signs of damage, such as cracks or leaks. If you notice any issues, it’s best to replace the valve.
4. Clean the Inlet Valve Filter:
Over time, the inlet valve’s filter can become clogged with debris, restricting water flow. Cleaning the filter is a simple yet effective solution. Turn off the dishwasher and disconnect it from the power source. Locate the filter, usually found near the water inlet valve, and remove it. Rinse it under running water to remove any accumulated dirt or debris. Once clean, reattach the filter and try running the dishwasher again.
5. Examine the Float Switch:
The float switch is a small device located at the bottom of the dishwasher tub. Its purpose is to monitor the water level inside the appliance. If the switch gets stuck in the raised position, it can send a signal to the dishwasher that the tub is already full, preventing it from filling with water. Gently press down on the float to ensure it moves freely. If it appears to be stuck, you may need to replace the float switch.
6. Check the Water Inlet Hose:
Inspect the water inlet hose for any kinks, bends, or blockages. A twisted or clogged hose can restrict water flow, causing the dishwasher to not fill properly. Straighten out any kinks and ensure the hose is free from debris. If you find any damage or blockages, it’s advisable to replace the hose.
7. Test the Water Inlet Solenoid:
The water inlet solenoid is an electromagnetic valve that controls the flow of water into the dishwasher. A malfunctioning solenoid can prevent water from entering the appliance. To test the solenoid, you’ll need a multimeter. Disconnect the dishwasher from the power source and locate the solenoid. Set your multimeter to the appropriate setting and measure the resistance across the solenoid’s terminals. If the reading is significantly different from the manufacturer’s specifications, it’s time to replace the solenoid.
8. Verify the Control Board:
The control board is the brain of your dishwasher, coordinating various functions, including water filling. A faulty control board can disrupt the filling process. Check for any visible signs of damage on the control board, such as burnt components or loose connections. If you suspect a problem with the control board, it’s best to seek professional assistance for repair or replacement.
9. Call in the Experts:
If you’ve tried all the troubleshooting steps mentioned above and your Kenmore dishwasher 665.12793K311 still won’t fill, it’s time to call in the experts. Contact Kenmore customer support or a qualified appliance repair technician who can diagnose the issue accurately and provide the necessary repairs.
Conclusion:
Dealing with a Kenmore dishwasher 665.12793K311 that won’t fill can be a real headache. However, armed with the knowledge gained from this article, you’re now equipped to tackle this problem head-on. Remember to check the water supply, inspect the water inlet valve, clean the filter, examine the float switch, and test the solenoid and control board. By following these troubleshooting steps, you’ll increase your chances of resolving the issue and getting your dishwasher back to its efficient cleaning glory. Good luck, and happy dishwashing!