If your LG front-loading washing machine is not draining properly, it may be due to a clogged pump. Unclogging the pump is a fairly simple process that can be done without the help of a professional. This guide will walk you through the steps of unclogging your LG washing machine pump.
First, unplug the washing machine from the wall outlet. Then, remove the drain hose from the back of the washer. This will allow you to access the pump. Next, remove the pump cover by unscrewing the screws. Once the cover is removed, you will be able to see the pump impeller. This is the part of the pump that is most likely to be clogged. Using a pair of pliers, carefully remove any debris that is blocking the impeller. Be sure to be gentle when doing this, as the impeller is made of plastic and can easily break.
How To Unclog Pump In Front Loading Lg Washing Machine
Unclogging a pump in a front-loading LG washing machine can be done in a few simple steps. First, unplug the machine and remove the front panel. Then, locate the pump and remove any debris that may be blocking it. Once the debris is removed, check the pump for any signs of damage. If the pump is damaged, it should be replaced. After the pump is checked, reassemble the machine and plug it back in. Finally, run a cycle to ensure the pump is working properly. Following these steps should help unclog the pump in a front-loading LG washing machine.
How To Unclog Pump In Front Loading Lg Washing Machine
1. Unplug the washing machine from the power outlet.
2. Remove the front panel of the washing machine.
3. Locate the drain pump, which is usually located near the bottom of the machine.
4. Disconnect the drain hose from the pump and check for any blockages.
5. Use a wet/dry vacuum to remove any debris that may be blocking the pump.
6. Reconnect the drain hose and reassemble the front panel.
7. Plug the washing machine back into the power outlet and turn it on.
8. Run a cycle to test if the pump is now unclogged.
In conclusion, unclogging a pump in a front loading LG washing machine can be done with relative ease. First, unplug the machine and remove the drain filter. Then, use a vacuum cleaner to remove any debris from the filter. Finally, use a screwdriver to remove the pump and check for any blockages. If the pump is blocked, use a brush to clear the blockage and then replace the pump. With a few simple steps, you can quickly and easily unclog the pump in your LG washing machine.