Testing the motor on a Frigidaire washer is a relatively simple process. First, unplug the washer from the wall outlet and remove the back panel. Next, locate the motor and check the wiring harnesses for any loose connections. Once the wiring is secure, plug the washer back in and turn it on. If the motor runs, the issue is likely not with the motor. If the motor does not run, use a multimeter to test the motor’s continuity. If the multimeter does not register any continuity, the motor is likely faulty and needs to be replaced.
How To Test Motor On Frigidaire Washer
1. Unplug the washer from the power outlet.
2. Remove the back panel of the washer to access the motor.
3. Use a multimeter to check the motor for continuity.
4. Set the multimeter to the ohms setting and place the probes on the two terminals of the motor.
5. If the multimeter reads a continuous beep or a number close to zero, the motor is working properly.
6. If the multimeter does not beep or reads a high number, the motor is not working and needs to be replaced.
How To Test Motor On Frigidaire Washer
Testing the motor on a Frigidaire washer is a relatively simple process. First, you should disconnect the power to the washer and remove the back panel. Next, you should use a multimeter to test the motor for continuity. If the motor is working properly, you should see a continuous electrical current flowing through it. If the motor is not working properly, you should replace it with a new one. Finally, you should reconnect the power to the washer and test the motor again to make sure it is working properly. Following these steps will help ensure that your Frigidaire washer is running smoothly.