If you have a Maytag commercial washer, you may be wondering how to stop it from running. In this guide, we will provide step-by-step instructions on how to stop your Maytag commercial washer. First, you will need to locate the power switch on the back of the machine. This switch should be labeled either “Power” or “Off”. Flip the switch to the “Off” position to stop the machine from running. If the switch is not labeled, you can use a voltage meter to identify which switch is the power switch. Once you have located the power switch, flip it to the “Off” position to stop the machine from running. You may also need to unplug the machine from the wall outlet to ensure that the machine is completely powered off. Once the machine is powered off, you can then proceed with any necessary repairs or maintenance.
How To Stop Maytag Commercial Washer
To stop a Maytag commercial washer, press and hold the “Stop/Pause” button for 3 seconds. This will stop the cycle and turn off the machine.
How To Stop Maytag Commercial Washer
1. Unplug the washer from the power source.
2. Turn off the water supply to the washer.
3. Drain the washer of all water.
4. Disconnect the hoses from the washer.
5. Clean the washer drum and exterior.
6. Wipe down the washer with a damp cloth.
7. Check the washer for any loose or damaged parts.
8. Replace any damaged or worn parts.
9. Reattach the hoses and plug the washer back in.
10. Turn on the water supply to the washer.
The best way to stop a Maytag commercial washer from leaking is to ensure that all the hoses and fittings are properly connected and that the water supply is turned off when the machine is not in use. Additionally, the water level should be checked regularly and the washer should be cleaned regularly to prevent any build-up of dirt or debris. If the washer continues to leak, it is best to call a professional to inspect the machine and make any necessary repairs.