If you have a Kitchenaid refrigerator with a built-in defrost system, you may need to know how to stop the defrost cycle. This is a relatively simple process that can be done in a few steps. The first step is to locate the defrost thermostat, which is usually located behind the refrigerator’s evaporator coils. Once you have located the thermostat, you will need to turn off the power to the refrigerator. This can be done by unplugging the refrigerator from the wall outlet or by turning off the circuit breaker that supplies power to the refrigerator. Once the power is off, you can locate the defrost thermostat and turn the dial to the “off” position. This will stop the defrost cycle and allow the refrigerator to cool properly.
How To Stop Defrost In Kitchenaid Refrigerator
To stop defrost in a Kitchenaid refrigerator, first unplug the refrigerator and turn off the water supply. Next, remove the back panel of the freezer and locate the defrost thermostat. Unscrew the thermostat and disconnect the wires. Then, locate the defrost timer and unscrew it. Disconnect the wires and remove the timer. Finally, replace the timer with a new one and reconnect the wires. Replace the thermostat and reconnect the wires. Finally, plug the refrigerator back in and turn the water supply back on.
How To Stop Defrost In Kitchenaid Refrigerator
1. Unplug the refrigerator from the wall outlet.
2. Locate the defrost timer, which is usually located in the back of the refrigerator near the compressor.
3. Turn the timer knob counterclockwise until it stops.
4. Plug the refrigerator back into the wall outlet.
5. Push the refrigerator power button to turn the refrigerator back on.
6. Check the temperature settings and adjust as necessary.
To prevent defrosting in a Kitchenaid refrigerator, it is important to keep the refrigerator clean and free of debris. Make sure to regularly clean the condenser coils and the interior of the refrigerator to remove any dust or dirt that may be causing the defrosting. Additionally, check the door seals to make sure they are properly sealed and replace them if necessary. Finally, keep the temperature of the refrigerator at the recommended setting and make sure that the door is closed properly when not in use. By following these simple steps, you can help to prevent defrosting in your Kitchenaid refrigerator.