How To Reset Whirlpool Air Conditioner – Guide

Resetting your Whirlpool air conditioner can be a simple process that can help you get your air conditioner running again. This guide will walk you through the steps necessary to reset your Whirlpool air conditioner. Before you begin, make sure that the power to the unit is turned off and that the air filter is clean.

First, locate the reset button on the air conditioner. This can usually be found on the back or side of the unit. Once you have located the reset button, press and hold it for at least 10 seconds. This will reset the air conditioner and allow it to start up again.

Next, turn the power back on to the unit and wait for it to start up. Once the unit has started up, you should be able to adjust the settings and use the air conditioner as normal. If the reset process does not work, you may need to contact a professional for help.


Popular: How To Clean Whirlpool E5 Error On Air Conditioner


How To Reset Whirlpool Air Conditioner

1. Turn off the power to the air conditioner at the main circuit breaker.
2. Remove the filter from the air conditioner.
3. Clean the filter with a vacuum cleaner or a damp cloth.
4. Replace the filter and turn the power back on.
5. Set the air conditioner to the “Off” position.
6. Press and hold the “Reset” button for 10 seconds.
7. Release the “Reset” button and turn the air conditioner back on.
8. Adjust the temperature and fan settings as desired.


Favorite: How To Take Whirlpool Air Conditioner Front Cover Off


How To Reset Whirlpool Air Conditioner

In conclusion, resetting a Whirlpool air conditioner is a simple process that can be done in just a few steps. First, unplug the air conditioner from the power source. Then, press and hold the reset button for five seconds. Finally, plug the air conditioner back into the power source and turn it on. Following these steps should reset the air conditioner and get it back up and running.