If your Samsung dryer isn’t working properly, it may be due to a faulty control board. Resetting the control board can help restore the dryer to its normal functioning state. This guide will explain how to reset a Samsung dryer control board.
How To Reset Samsung Dryer Control Board
1. Unplug the dryer from the wall outlet.
2. Remove the back panel of the dryer.
3. Locate the control board and disconnect the wiring harness from the board.
4. Remove the mounting screws from the control board.
5. Install the new control board and reconnect the wiring harness.
6. Replace the back panel and plug the dryer back into the wall outlet.
7. Turn on the dryer and test it to make sure it is working properly.
The process of resetting a Samsung dryer control board is relatively simple, but it is important to follow the steps carefully to ensure that the reset is successful. First, unplug the dryer from the wall outlet and then press and hold the power button for at least 10 seconds. After that, plug the dryer back in and press the power button again to turn it on. If the reset was successful, the dryer should operate normally. If the reset was unsuccessful, it may be necessary to replace the control board.