If you own a Maytag MMV5208WS-1 microwave, you may need to reset the filter from time to time. Resetting the filter is a simple process that only takes a few minutes. This guide will walk you through the steps of resetting the filter on your Maytag MMV5208WS-1 microwave.
First, you will need to locate the filter. The filter is usually located behind the grille on the bottom of the microwave. Once you have located the filter, you will need to remove it. To do this, simply pull the filter out from the grille.
Next, you will need to clean the filter. To do this, you can use a vacuum cleaner or a damp cloth. Make sure to remove any debris or dirt that may be stuck in the filter. Once you have cleaned the filter, you can put it back into the grille.
Finally, you will need to reset the filter
How To Reset Maytag Microwave Mmv5208Ws-1 Filter
To reset your Maytag microwave MMV5208WS-1 filter, you will need to press and hold the “Filter Reset” button for 3 seconds. This will reset the filter and allow you to use the microwave again.
How To Reset Maytag Microwave Mmv5208Ws-1 Filter
1. Unplug the microwave from the wall outlet.
2. Remove the screws from the top of the microwave and lift off the top panel.
3. Locate the filter at the top of the microwave.
4. Remove the filter by pressing the tabs on either side and pulling it out.
5. Clean the filter with warm, soapy water and a soft brush.
6. Rinse the filter thoroughly and allow it to air dry.
7. Reinstall the filter by pressing it back into place.
8. Replace the top panel and screws.
9. Plug the microwave back into the wall outlet.
The reset process for the Maytag MMV5208WS-1 microwave filter is a straightforward one. First, unplug the microwave from the wall outlet. Then, remove the filter cover and take out the filter. Clean the filter with warm, soapy water and a soft brush, and then rinse it thoroughly. Once the filter is clean, reinstall it in the microwave and replace the filter cover. Finally, plug the microwave back into the wall outlet. This process should reset the filter and get your microwave running like new again.