If your Kitchenaid washer lid lock is stuck and you need to reset it, this guide will help you. The first step is to unplug the washer from the power source. Once the washer is unplugged, you will need to locate the lid lock switch. This switch is usually located on the side of the washer, near the top. Once you have located the switch, you will need to press and hold the switch for approximately 10 seconds. After 10 seconds, the lid lock should be reset and the washer should be ready to use.
How To Reset Kitchenaid Washer Lid Lock
If you need to reset the lid lock on your Kitchenaid washer, you can do so by pressing and holding the “End of Cycle” button for three seconds. This will reset the lid lock and allow you to open the washer lid. Make sure to unplug the washer before attempting to reset the lid lock. After resetting the lid lock, you can plug the washer back in and continue with your laundry.
How To Reset Kitchenaid Washer Lid Lock
1. Unplug the washer from the power source.
2. Locate the lid lock switch, usually located on the inside of the washer lid.
3. Insert a flathead screwdriver into the slot of the lid lock switch.
4. Turn the screwdriver clockwise until you hear a click.
5. Remove the screwdriver and plug the washer back in.
6. Close the lid and press the start button. The lid lock should now be reset.
In conclusion, resetting the Kitchenaid washer lid lock is a relatively simple process. All you need to do is locate the reset button, press and hold it for three seconds, and then release it. This will reset the lid lock and allow you to open the washer lid. If the lid lock does not reset, you may need to contact Kitchenaid for further assistance.