If your Frigidaire dryer is not drying your clothes properly, it may be time to reset the filter check. Resetting the filter check on your Frigidaire dryer is a simple process that will help to ensure that your dryer is running efficiently. Here are the steps to reset the filter check on your Frigidaire dryer:
1. Unplug the dryer from the wall outlet.
2. Remove the lint filter from the dryer.
3. Locate the filter check button on the dryer. It is usually located on the back of the dryer, near the lint filter.
4. Press and hold the filter check button for 10 seconds.
5. Release the filter check button and plug the dryer back into the wall outlet.
6. Replace the lint filter and close the dryer door.
How To Reset Frigidaire Dryer Filter Check
Frigidaire dryers have a filter check light that will illuminate when the lint filter needs to be cleaned. To reset the filter check light, the lint filter must be cleaned and the door must be opened and closed. If the filter check light is still illuminated, the dryer must be unplugged for 10 seconds and plugged back in. This will reset the filter check light. It is important to regularly clean the lint filter to ensure proper air flow and to prevent a fire hazard.
How To Reset Frigidaire Dryer Filter Check
1. Unplug the dryer from the wall outlet.
2. Open the dryer door and remove the lint filter.
3. Vacuum out the lint filter compartment and the lint trap.
4. Replace the lint filter and close the dryer door.
5. Plug the dryer back into the wall outlet.
6. Push and hold the start button for five seconds.
7. The filter check light should now be reset.
The best way to reset the Frigidaire dryer filter check is to unplug the dryer from the wall outlet and wait for five minutes. After five minutes, plug the dryer back into the wall outlet and press the start button. This should reset the filter check and the dryer should be ready to use again. If the filter check does not reset, then it is likely that the filter needs to be replaced.