If your Electrolux washer lid lock is stuck and you want to reset it, this guide will help you. Resetting the lid lock on your Electrolux washer is a simple process that requires only a few steps. First, you will need to unplug the washer from the wall outlet and turn off the water supply. Then, locate the lid lock switch on the washer’s control panel and press and hold the lid lock button for 3-5 seconds. Once the lid lock light on the control panel has gone off, you can release the button and plug the washer back in. Finally, turn the water supply back on and you should be able to open the lid of your washer.
How To Reset Electrolux Washer Lid Lock
If you have an Electrolux washer with a lid lock, you may need to reset it if it becomes stuck or won’t open. To reset the lid lock, you will need to unplug the washer from the power source, wait 30 seconds, and then plug it back in. Once the washer has been reset, the lid should open normally. If the lid still won’t open, you may need to check the lid lock switch for any debris or dirt that could be preventing it from functioning properly. If the switch is clear, you may need to replace it.
How To Reset Electrolux Washer Lid Lock
1. Unplug the washer from the power source.
2. Locate the lid lock switch. It is usually located on the top right corner of the washer.
3. Use a flathead screwdriver to press the lid lock switch.
4. Hold the switch down for at least 10 seconds.
5. Plug the washer back in and turn it on.
6. Open and close the lid several times to ensure the lid lock is reset.
In conclusion, resetting the Electrolux washer lid lock is a relatively simple process. After unplugging the washer from the wall outlet, the user should press and hold the start/pause button for three seconds, followed by pressing the lid lock button for three seconds. This should reset the lid lock and allow the user to open the washer lid.