If you need to reset your Maytag top-load washing machine, you can do so in a few simple steps. Resetting the machine can help if it is not working properly or if it has stopped mid-cycle. Before you begin, make sure the machine is unplugged from the wall outlet. Once you have done this, you can proceed with the reset.
First, locate the reset button on the back of the machine. It is usually a small red button. Press and hold the button for 10 seconds. This will reset the machine and clear any errors. Next, plug the machine back into the wall outlet. Turn the machine on and select your desired cycle. The machine should now be reset and ready to use.
How To Reset A Top Load Maytag Washing Machine
Resetting a Maytag top-load washing machine is a straightforward process. First, unplug the machine from the wall outlet and wait for at least 30 seconds before plugging it back in. Then, press and hold the ‘Start/Pause’ button for at least 5 seconds. The machine will then enter its diagnostic mode, and the lights on the control panel will begin to flash. Once the lights have stopped flashing, press the ‘Start/Pause’ button again to reset the machine. This should restore the machine to its factory settings, allowing you to use it as normal.
How To Reset A Top Load Maytag Washing Machine
1. Unplug the washing machine from the power source.
2. Turn off the water supply to the machine.
3. Open the lid and remove any clothes or items from the machine.
4. Press and hold the start/pause button for 5 seconds.
5. Press the power button and the start/pause button at the same time for 10 seconds.
6. Plug the machine back in and turn the water supply back on.
7. Close the lid and press the start/pause button.
8. Select the desired cycle and press start.
In conclusion, resetting a top load Maytag washing machine is a relatively simple process. First, unplug the machine and wait a few minutes before plugging it back in. Then, press and hold the Start/Pause button for five seconds to reset the machine. Finally, press the Start/Pause button again to restart the machine. Following these steps should reset the machine and allow it to operate normally again.