How To Replace Water Level Switch On Whirlpool Washer

If your Whirlpool washer is not draining properly, it may be time to replace the water level switch. This guide will walk you through the steps of replacing the water level switch on a Whirlpool washer. Before beginning, make sure you have the correct replacement switch for your model.

First, unplug the washer from the wall outlet and turn off the water supply. Next, remove the back panel of the washer and locate the water level switch. Disconnect the wires from the switch and unscrew the mounting screws. Carefully remove the switch from the washer.

Install the new water level switch into the washer. Make sure the switch is securely in place and reconnect the wires. Finally, replace the back panel and plug the washer back into the wall outlet. Turn on the water supply and test the washer to make sure it is draining properly.

 

How To Replace Water Level Switch On Whirlpool Washer

1. Unplug the washer from the wall outlet.

2. Locate the water level switch. This is usually located near the back of the washer, near the water inlet valves.

3. Disconnect the wires from the water level switch.

4. Remove the mounting screws that hold the water level switch in place.

5. Remove the old water level switch and discard it.

6. Install the new water level switch and secure it with the mounting screws.

7. Reconnect the wires to the new water level switch.

8. Plug the washer back into the wall outlet and test the new water level switch.

Replacing the water level switch on a Whirlpool washer is a relatively simple task that can be done in a few steps. First, unplug the washer and shut off the water supply. Next, remove the screws that secure the top panel and remove the panel. Then, locate the water level switch and disconnect the wires. Remove the mounting screws and take out the switch. Finally, install the new switch and reconnect the wires. Reassemble the washer and turn the water supply back on. Test the washer to make sure the water level switch is working properly. With these simple steps, you can replace the water level switch on a Whirlpool washer with ease.