Replacing the front control board on a Whirlpool microwave is a relatively simple task that can be completed in a few steps. Before beginning, make sure that you have all the necessary tools and materials. You will need a Phillips-head screwdriver, a flat-head screwdriver, a new front control board, and a pair of needle-nose pliers. Additionally, you should make sure the power to the microwave is disconnected. Once you have gathered the necessary tools and materials, you can begin the process of replacing the front control board.
How To Replace The Front Control Board On A Whirlpool Microwave
Replacing the front control board on a Whirlpool microwave is a relatively simple process that can be done in a few steps. First, unplug the microwave from the power source and remove the screws from the top of the unit. Next, remove the control panel and locate the control board, which is located behind the control panel. Disconnect the wires from the board, and then remove the board from the unit. Replace the board with a new one and reconnect the wires. Finally, reattach the control panel and screws and plug the microwave back into the power source.
How To Replace The Front Control Board On A Whirlpool Microwave
1. Unplug the microwave from the wall outlet.
2. Remove the screws that secure the top cover of the microwave.
3. Carefully remove the top cover and set it aside.
4. Locate the front control board and disconnect the wires from it.
5. Remove the screws that secure the control board to the microwave.
6. Carefully remove the control board and set it aside.
7. Install the new control board in the same way that the old one was removed.
8. Reconnect the wires to the new control board.
9. Secure the control board to the microwave with the screws.
10. Replace the top cover and secure it with the screws.
11. Plug the microwave back into the wall outlet.
Replacing the front control board on a Whirlpool microwave is a relatively easy task that can be completed in a few simple steps. First, unplug the microwave from the wall outlet and remove the screws that hold the control panel in place. Next, remove the control panel and disconnect the wires from the old board. Finally, connect the new board and secure it in place with the screws. With these steps, you can easily replace the front control board on your Whirlpool microwave.