Replacing the belt on a Whirlpool dryer is a fairly straightforward process that can be completed in a few simple steps. The first step is to unplug the dryer from the wall outlet and then remove the back panel of the dryer. Once the back panel is removed, you will be able to access the belt and pulleys. The belt should be removed from the pulleys, and then the new belt should be threaded through the pulleys. Once the new belt is in place, the back panel should be reattached and the dryer should be plugged back in. With these simple steps, you should be able to successfully replace the belt on your Whirlpool dryer.
How To Replace The Belt On A Whirlpool Dryer
1. Unplug the dryer from the wall outlet and turn off the gas supply if applicable.
2. Remove the front panel of the dryer.
3. Remove the drum from the dryer.
4. Disconnect the idler pulley and the motor pulley from the belt.
5. Remove the old belt from the dryer.
6. Install the new belt around the drum, making sure it is properly aligned.
7. Reattach the idler pulley and the motor pulley to the belt.
8. Reinstall the drum in the dryer.
9. Reattach the front panel.
10. Plug the dryer back in and turn on the gas supply if applicable.
Replacing the belt on a Whirlpool dryer is a relatively simple task that can be completed in a few steps. First, remove the top panel of the dryer and then the front panel. Next, remove the old belt from the pulleys and the motor shaft. Finally, install the new belt around the pulleys and the motor shaft, and then reassemble the dryer. With the right tools and a little bit of patience, anyone can replace the belt on a Whirlpool dryer.