Replacing the agitator dogs in a Haier washing machine is a relatively simple task that can be completed in a few steps. Before beginning, it is important to make sure you have the correct replacement agitator dogs for your particular model of washing machine. Once you have the correct parts, you can begin the process of replacing the agitator dogs.
First, unplug the washing machine from the wall and turn off the water supply. Then, remove the agitator cap from the top of the agitator by unscrewing it. Next, remove the agitator from the top of the washer by pulling it straight up. Once the agitator is removed, you will be able to access the agitator dogs. Using a screwdriver, remove the screws that are holding the agitator dogs in place. Once the screws are removed, you can lift the agitator dogs out of the washer.
How To Replace The Agitator Dogs Ina A Haier Washing Machine
Replacing the agitator dogs in a Haier washing machine is a simple repair that can be done at home. First, unplug the machine and remove the agitator cap. Use a flat head screwdriver to remove the screw that holds the agitator in place. Pull out the agitator and set aside. Then, remove the old agitator dogs from the agitator shaft. Install the new agitator dogs and place the agitator back into the machine. Finally, replace the agitator cap and screw, and plug the machine back in. With a few simple steps, the agitator dogs in a Haier washing machine can be easily replaced.
How To Replace The Agitator Dogs Ina A Haier Washing Machine
1. Unplug the washing machine from the wall outlet and shut off the water supply to the machine.
2. Remove the agitator cap from the top of the agitator by pulling it straight up.
3. Remove the bolt from the center of the agitator using a socket wrench.
4. Lift the agitator out of the washing machine.
5. Remove the old agitator dogs from the underside of the agitator by prying them off with a flathead screwdriver.
6. Place the new agitator dogs in the same position as the old ones.
7. Place the agitator back into the washing machine and secure the bolt.
8. Replace the agitator cap.
9. Reconnect the water supply and plug the washing machine back into the wall outlet.
Replacing the agitator dogs in a Haier washing machine is a relatively easy process. All you need is a few basic tools, a new set of agitator dogs, and a few minutes of your time. First, you should unplug the machine and remove the agitator from the top of the washer. Once the agitator is removed, you can then remove the old agitator dogs and replace them with the new ones. Finally, you can reassemble the agitator and reinstall it in the washer. With a few simple steps, you can have your Haier washing machine running like new in no time.