Replacing the motor coupling on a Whirlpool washer can be a daunting task, but it is an important part of maintaining your washer. The motor coupling connects the motor to the transmission, and if it fails, the washer will not spin or agitate. Fortunately, replacing the motor coupling is a relatively simple process that can be done with basic tools. In this guide, we will walk you through the steps for replacing the motor coupling on a Whirlpool washer.
How To Replace Motor Coupling On Whirlpool Washer
1. Unplug the washer from the power source.
2. Remove the access panel on the back of the washer.
3. Remove the bolts that secure the motor to the washer cabinet.
4. Disconnect the wiring harness from the motor.
5. Remove the old motor coupling from the motor shaft.
6. Install the new motor coupling on the motor shaft.
7. Reconnect the wiring harness to the motor.
8. Secure the motor to the washer cabinet with the bolts.
9. Replace the access panel on the back of the washer.
10. Plug the washer back into the power source.
Replacing the motor coupling on a Whirlpool washer is a relatively easy job that can be done by most homeowners with a few basic tools. After unplugging the washer, the first step is to remove the cabinet and the motor. Then the old motor coupling should be removed and the new one installed. Finally, the motor and cabinet should be reattached and the washer plugged back in. With a few basic tools and a little bit of time, anyone can replace the motor coupling on a Whirlpool washer.